¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. Bpq32
  2. Topics

Outgoing Pactor connections fail, income connections OK

 

Still having issues with Pactor connections but only when I am initiating the connection, incoming connections work fine.
When I press the start forwarding button, the radio is set to freq correctly, and the PTC begins calling, but as soon as the other end answers the call my PTC goes to error status and the connection times out.
Here the settings for the port, hopefully some one will spot what is missing or wrong.
; ?SCS PACTOR ?
PORT
?PORTNUM=4
?ID=HF 40M Pactor 7100.4
?DRIVER=SCSPACTOR
?COMPORT=/dev/ttyUSB2
?SPEED=115200
?PORTCALL=KI0BK
?QUALITY=0
?;INTERLOCK=1
?CONFIG
?APPL BBS
?MHEARD ON
?RADIO 1
?PSKA 205
?FSKA 150
?TONES 4
?MYLEV 3
?CWID 0
?CONType 3
ENDPORT
?
TIA Jim
 

Did you set your pska an fska setting to the rig you are using , use this link


On Thu, Oct 24, 2024, 1:21 PM Jim - KI0BK via <jccordill=[email protected]> wrote:
Still having issues with Pactor connections but only when I am initiating the connection, incoming connections work fine.
When I press the start forwarding button, the radio is set to freq correctly, and the PTC begins calling, but as soon as the other end answers the call my PTC goes to error status and the connection times out.
Here the settings for the port, hopefully some one will spot what is missing or wrong.
; ?SCS PACTOR ?
PORT
?PORTNUM=4
?ID=HF 40M Pactor 7100.4
?DRIVER=SCSPACTOR
?COMPORT=/dev/ttyUSB2
?SPEED=115200
?PORTCALL=KI0BK
?QUALITY=0
?;INTERLOCK=1
?CONFIG
?APPL BBS
?MHEARD ON
?RADIO 1
?PSKA 205
?FSKA 150
?TONES 4
?MYLEV 3
?CWID 0
?CONType 3
ENDPORT
?
TIA Jim
 

I do set the levels in the above config, which I copied from my Airmail3 setup and works ok.
I'll review the link you sent and see if that helps.
73
?
 

Levels seem ok, alc meter is zero and power out is 50w (half power)
What else would cause the PTC to return an error status when attempting to connect to remote bbs?
?
 

¿ªÔÆÌåÓý

Slightly off frequency?

On Oct 24, 2024, at 14:40, Jim - KI0BK via groups.io <jccordill@...> wrote:

?
Levels seem ok, alc meter is zero and power out is 50w (half power)
What else would cause the PTC to return an error status when attempting to connect to remote bbs?
?
 

Always a possibility, but when the other side connects to me it works!?

1 - 6 of 6