开云体育

You need to be signed in to save changes

Lee Bengston All Messages By This Member #32000 In PiLinBPQ in the web interface when I select "Ports" and then "Beacons" on any port, I get the message above saying I need to be signed in to save changes. I get this message even after signing in as the sysop.? I also get it when I am on the host computer web browsing to 127.0.0.1 where no signing is normally required. I am not able to save any changes made to the beacons.? The only way I can change them is to edit the UIUtil.cfg file. This issue has been there for a long time - has not changed through several upgrades. I've been working around it by editing the file, but it would be nice to be able to do it the easy way. Thanks, Lee K5DAT
John G8BPQ All Messages By This Member #32001 开云体育 The message is warning you that you need to be signed in - it isn't saying you aren't signed in. So long as you are on 127.0.0.1 or signed it it will save. If not, you get an error message "Not authorized - please sign in" when you try to save. At least that is what happens here! 73, John On 20/02/2021 17:02, K5DAT wrote: toggle quoted message Show quoted text In PiLinBPQ in the web interface when I select "Ports" and then "Beacons" on any port, I get the message above saying I need to be signed in to save changes. I get this message even after signing in as the sysop.? I also get it when I am on the host computer web browsing to 127.0.0.1 where no signing is normally required. I am not able to save any changes made to the beacons.? The only way I can change them is to edit the UIUtil.cfg file. This issue has been there for a long time - has not changed through several upgrades. I've been working around it by editing the file, but it would be nice to be able to do it the easy way. Thanks, Lee K5DAT
Lee Bengston All Messages By This Member #32002 OK, I fleshed it out further.? The problem is only with Port 1.? I can save changes on other ports. Screenshot of how it looks before attempting to change: Then edited the path (replaced KB9PVH-7 with KB9UNZ-7) and clicked Save. What I didn't notice previously is it changed to show Port 0 ! Then when I go back to Ports and click Beacons for port 1 it looks the same as where I started.? This is when accessing locally via 127.0.0.1, but I don't think it matters whether I am local or remote. I suspect I did something to the configuration somewhere a long time ago that caused this. 73, Lee K5DAT toggle quoted message Show quoted text On Sat, Feb 20, 2021 at 11:42 AM John G8BPQ <john.wiseman@...> wrote: The message is warning you that you need to be signed in - it isn't saying you aren't signed in. So long as you are on 127.0.0.1 or signed it it will save. If not, you get an error message "Not authorized - please sign in" when you try to save. At least that is what happens here! 73, John On 20/02/2021 17:02, K5DAT wrote: In PiLinBPQ in the web interface when I select "Ports" and then "Beacons" on any port, I get the message above saying I need to be signed in to save changes. I get this message even after signing in as the sysop.? I also get it when I am on the host computer web browsing to 127.0.0.1 where no signing is normally required. I am not able to save any changes made to the beacons.? The only way I can change them is to edit the UIUtil.cfg file. This issue has been there for a long time - has not changed through several upgrades. I've been working around it by editing the file, but it would be nice to be able to do it the easy way. Thanks, Lee K5DAT
John G8BPQ All Messages By This Member #32003 开云体育 Ok, I'll check into that and see if I can find what could cause it. Thanks, John On 20/02/2021 18:07, K5DAT wrote: toggle quoted message Show quoted text OK, I fleshed it out further.? The problem is only with Port 1.? I can save changes on other ports. Screenshot of how it looks before attempting to change: Then edited the path (replaced KB9PVH-7 with KB9UNZ-7) and clicked Save. What I didn't notice previously is it changed to show Port 0 ! Then when I go back to Ports and click Beacons for port 1 it looks the same as where I started.? This is when accessing locally via 127.0.0.1, but I don't think it matters whether I am local or remote. I suspect I did something to the configuration somewhere a long time ago that caused this. 73, Lee K5DAT On Sat, Feb 20, 2021 at 11:42 AM John G8BPQ <john.wiseman@...> wrote: The message is warning you that you need to be signed in - it isn't saying you aren't signed in. So long as you are on 127.0.0.1 or signed it it will save. If not, you get an error message "Not authorized - please sign in" when you try to save. At least that is what happens here! 73, John On 20/02/2021 17:02, K5DAT wrote: In PiLinBPQ in the web interface when I select "Ports" and then "Beacons" on any port, I get the message above saying I need to be signed in to save changes. I get this message even after signing in as the sysop.? I also get it when I am on the host computer web browsing to 127.0.0.1 where no signing is normally required. I am not able to save any changes made to the beacons.? The only way I can change them is to edit the UIUtil.cfg file. This issue has been there for a long time - has not changed through several upgrades. I've been working around it by editing the file, but it would be nice to be able to do it the easy way. Thanks, Lee K5DAT

Previous Topic Next Topic