¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. Bpq32
  2. Topics

No response to a remote call

 

Hi Everyone,
?
Interesting problem, if a caller calls the system, you hear it trying 10 times then gives up
During that time,? if I go into terminal and do MH 1 it comes back with the caller call sign
But it will not answer the caller...
?
Can some explain what happens when a caller comes in please
?
All the best from Alan
 

¡°if a caller calls the system¡±
?
Using what mode? ?Can you post your BBS log of the failed attempt please!
is this every attempt by every user or just one user?
?
?
 

Hi Jim,
?
? I have only one user so far...
?
? This is on Port 1 VHF and using Kantronics XPC 3 TNC
?
? Will post log next? time...
?
All the best from Alan
 

Is your kpc3 in xkiss mode?
?
Here is part of my config file for my kpc3 kiss port
PORT
? PORTNUM=1 ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ; Port number
? ID=VHF 145.090 MHz 1200 bps ? ? ? ? ? ? ? ? ? ; PORTS command text
? TYPE=ASYNC
? COMPORT=/dev/ttyUSB0
? SPEED=4800
? CHANNEL=A
? PROTOCOL=KISS ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ; setup Kantronics tnc to xkiss mode
? KISSOPTIONS=ACKMODE
?
?
before setting xkiss mode be sure to set xflow off then?
set intface to xkiss?
then type reset
?
jim KI0BK?
?
 

Hi Jim,
?
? ?Yes that was the first thing I did, that is the sort of thing one forgets :)
?
PORT
PORTNUM=1
ID=144.9375 MHz 1200 bps
TYPE=ASYNC
COMPORT=/dev/ttyS5
SPEED=9600
PROTOCOL=KISS
KISSOPTIONS=ACKMODE
CHANNEL=A
FRACK=7000
RESPTIME=1000
SLOTTIME=100
TXDELAY=250 ? ? ? ?; Needs adjusted for your radio
PERSIST=160
RETRIES=3 ? ? ? ? ; may want to adjust as needed
DIGIFLAG=1 ? ? ? ? ; Set to 0 for HF
TXTAIL=50 ? ? ? ? ?; Needs adjusted for your radio
PACLEN=236 ? ? ? ? ; Set to 64 for HF
MAXFRAME=4 ? ? ? ? ; Set to 1 for HF
FULLDUP=0
RESETONEXIT=1
NOKEEPALIVES=0
ENDPORT
?
all the best from Alan
 

On Thu, Apr 10, 2025 at 08:17 PM, Jim - KI0BK wrote:
before setting xkiss mode be sure to set xflow off then?
set intface to xkiss?
then type reset
?
?
Good Morning Jim
?
? Can you explain what "set xflow off" does please
?
All the best from Alan

1 - 6 of 6