We are moving our club LinBPQ node from one site to another. As such I need to change the Beacon text to correctly show the new site. I have tried editing the ~/linbpq/bpq32.cfg file and restarting the node. However, the beacon that is transmitted over the air is not changing. It still shows the old text, despite having verified that it is updated in the configuration.

?

Is there another location, other than bpq32.cfg, that beacon text can be set that I may be forgetting about?

On September 11, 2024 at 23:20:35, John G8BPQ via (john.wiseman@...) wrote:

Yes, there is also a port specific beacon, set in the ports section of the web management interface and stored in UIUtil.cfg

73, John

On 12/09/2024 04:53, Levi wrote:

We are moving our club LinBPQ node from one site to another. As such I need to change the Beacon text to correctly show the new site. I have tried editing the ~/linbpq/bpq32.cfg file and restarting the node. However, the beacon that is transmitted over the air is not changing. It still shows the old text, despite having verified that it is updated in the configuration.

?

Is there another location, other than bpq32.cfg, that beacon text can be set that I may be forgetting about?