I have searched for the abilty to have Kiss AX25 interface on the RPi4 I just configured. In the JohnWiseman download directories there are files which are binary, not zipped. I am unsure how to proceed to execute or incorporate them to provide the link layer interface to a winlink program using an old Signal-link interface. I realize that I could do the whole thing in software but would like to understand how to employ? the piQtSoundModem binary.? There seems to be no docs to guide me.?

Any suggestions - pointers would be appreciated. I appreciate the UZ7HO software and it works great in windows with the above config.? I would simply like to use the RPi instead.?

?

thanks In advance.?

John de K3GO?

On Aug 20, 2024, at 3:58?AM, John G8BPQ via groups.io <john.wiseman@...> wrote:

? After downloading the binary you need to set it as executable. Then you can just run it with ./piQtSoundModem

You are likely to have to install the Qt5 runtime This should do it:

sudo apt-get install libqt5serialport5

If you are running on a 64 bit OS you may need to use piQtSoundModem64, and I suggest you use the latest Beta version from



73, John G8BPQ

On 19/08/2024 22:22, K3GO wrote:

I have searched for the abilty to have Kiss AX25 interface on the RPi4 I just configured. In the JohnWiseman download directories there are files which are binary, not zipped. I am unsure how to proceed to execute or incorporate them to provide the link layer interface to a winlink program using an old Signal-link interface. I realize that I could do the whole thing in software but would like to understand how to employ? the piQtSoundModem binary.? There seems to be no docs to guide me.?

Any suggestions - pointers would be appreciated. I appreciate the UZ7HO software and it works great in windows with the above config.? I would simply like to use the RPi instead.?

?

thanks In advance.?

John de K3GO?

On Aug 20, 2024, at 10:21?AM, johnk3go <johnk3go@...> wrote:

Thanks I am running 64 bit and had set it executable.?

I have not loaded the QT5 runtime?

Will do that now

John

Sent from johnk3go@... ?

iPhone +1-770-841-4800

On Aug 20, 2024, at 3:58?AM, John G8BPQ via groups.io <john.wiseman@...> wrote:

? After downloading the binary you need to set it as executable. Then you can just run it with ./piQtSoundModem

You are likely to have to install the Qt5 runtime This should do it:

sudo apt-get install libqt5serialport5

If you are running on a 64 bit OS you may need to use piQtSoundModem64, and I suggest you use the latest Beta version from



73, John G8BPQ

On 19/08/2024 22:22, K3GO wrote:

I have searched for the abilty to have Kiss AX25 interface on the RPi4 I just configured. In the JohnWiseman download directories there are files which are binary, not zipped. I am unsure how to proceed to execute or incorporate them to provide the link layer interface to a winlink program using an old Signal-link interface. I realize that I could do the whole thing in software but would like to understand how to employ? the piQtSoundModem binary.? There seems to be no docs to guide me.?

Any suggestions - pointers would be appreciated. I appreciate the UZ7HO software and it works great in windows with the above config.? I would simply like to use the RPi instead.?

?

thanks In advance.?

John de K3GO?