开云体育

Thanks everyone well i removed the 10092 port and now my bind error is gone, but i don’t see the 10093 port in the netstat command, i see other linbpq ports in the Listen state but not 10093. made

Comment out the UDP 10092 line.? It does not seem like you need it with this configuration. Kill the BPQ process.? If Windows start up the task manager and look for any 'phantom' bpq process that

Probably there is something else using udp port 10092 or 10093. You may be able to determine what with something like: ```sudo ss -nlpt``` or ```sudo netstat -nlpt``` This should show you what process

Hello, This may not be the right place for this question so please forgive me and direct me to the appropriate group. I am wondering why on the packet map at:

Hi attached is my current config for axip on my raspberrypi. just wondering what i am missing i am getting a bind error for the udp port. PORT PORTNUM=4 ID=AX/IP/UDP DRIVER=BPQAXIP PROTOCOL=AXUDP

I appreciate the feedback, Mark Sent with [Proton Mail](https://proton.me/mail/home) secure email.

I would set quality to 0 by uncommenting the Quality line.? You don't need to use NetRom on an aprs frequency. I would delete the MinQual line entirely (even though it is commented out) because

Hi, It works, very nice! Testing on iphone first - Using it via network lan tnc, direwolf built with dns-sd. Would like to try it on ipad but the redeem link doesn't work, is a separate one needed for

Hey, Ray Thanks Sent with [Proton Mail](https://proton.me/mail/home) secure email.

Look at this config by WH6FQE https://packet-radio.net/bpq32-configuration-example/ Ray N3HYM

Hello, I have an iPhone 16 running 18.4.1 I've used RadioMail with digirig lite with a FTM500D and FT-8900RI also have a Mobilinkd TNC4 I can use if that is an option. I have several 3 different

I’d be interested in helping test.

Getting close to having this thing homed in - Anyone with advice, would love to hear it ;APRSPath 1=? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ; Receive only port ;APRSPath 7=APRS,WIDE1-1

I’m interested in testing please John - KD6CLO Sent from MetroMail [email protected]> wrote:

Hello Rich, I didn't see that message here or I missed it, I'm sorry. Well that answers it, hopefully it will be implemented in one of the next releases. Thanks and 73, Boudewijn VE3TOK -- There is

Hello Boudewijn, That was a separate thread and John did reply. See /g/bpq32/message/44026 73 de Rich WA3WLH

Sorry Jon, iOS 18 only.

Hi John (G8BPQ), I hope you have read my message of a couple of days ago to the list that outgoing IPv6 telnet forwarding doesn't work in the latest beta as well as the stable version. It fails to

yes, like i replied earlier; the aprsis system will reject all dupes. so if a packet is sent by 2 methods or 20 methods, the first packet to arrive is accepted and all others are rejected. since there

Thanks, Rich. Running under gdb with an unstripped version should help. 73, John