开云体育

Currently all my links are up and the display is normal. if it helps, normally I monitor this on my win7 running Firefox, or on my tablet running safari. With the node running on a rasPi

The rest of the second trace.... 250519 20:44:29 |GB7CIP ? ?Uncompressing Message Comp Len 243 Msg Len 333 CRC 50a 250519 20:44:29 ?GB7CIP ? ?Msg 2499 Routing Trace To G7TWZ Via

I have written a message responder app using the POP3/SMTP interfaces. That seems to be working OK, but when I send from the account I created for that purpose (worpin@gb7wor.#32.gbr.euro) it fails. I

/g/bpq32/topic/97195851#msg37302 The thread above is from 2023, but I noticed it long before that. I've always used CLI to list links and routes, so I've hardly missed anything. 73,

I have 2 UDP links that come and go. And 1 TCP that I have not removed yet.? He can never see me in his MHeard list (I am the slave.) In the images port 1 is UDP links, port 2 is TCP links. -- 73,

These were taken less than 20 seconds apart.? The fewer links first, then the one with more 20 seconds later. -- 73, Mark, N5MDT Montgomery, Texas http://n5mdt.ham-radio-op.net:52852

That isn't something I've seen. Could you post the two two versions of the display and maybe I'll be able to see what is different. Thanks, John

It does for me as well.? I have always considered the LINKS page to be the least reliable in determining the status of the links. No clue why it does that. Perhaps a refresh plus a timing thing, and

Yes, outgoing TCP connects only support IPv4. IPV6=1 only affects how incoming connects work. 73, John

The issue with BPQ seems to be not the 'defaulting to IPv4' but that outgoing telnet to IPv6 fails to connect at all both in the latest stable and beta versions and this while IPv4 and IPv6 are both

This issue has been here awhile, but anytime one or more links are down, the links web page shows only one or two available links out of the six I have. ?Right now it shows two active links, but

Has anyone used systemd to start QtSoundmodem? If so, can you share the service file? Dave Menges

Oops, the last line should be read as 'and when not possible fall back to IPv4 -' -- There is nothing permanent except change Heraclitus

Presently running version 6.0.24.71 and IPv4 / IPv6 enabled as usual here. What I see with forwarding to hostnames who resolves to both IPv4 and IPv6 addresses BPQ defaults to IPv4 forwarding. I

The gtor command was not recognised by BPQ. This should be fixed in the latest version (released today) but I'm waiting to hear from Sergej to be sure it works. I'd welcome you feedback as well.

John, Few days ago I spent some time in comparing behaviour of SCS Dragon vs. KAM XL controller by using QtTerm and then by using minicom terminal: For example, SCS driver allows a sysop to initiate

Thank you John! 73 de Angelo

BPQ32.dll (in BPQ32.zip) and BPQMail.exe are in my Beta download. There isn't an Installer. 73, John

HI John, Is there an official release for windows??? Angelo --------------------------------------------------------- If you don't ask, you will never know!! ________________________________ Sent:

This should fix a problem with connects to the BBS causing a crash in some circumstances. There have also been a number of fixes to the INP3 code, so it you are using INP3 please check that it is