开云体育

Hi Chuck, The text of the message follows:

Hi, Chris: Tell us about message #3817. Tell us about who it is from and addressed to whom. 73, Chuck 3817

Good morning! Can anyone share the secret in figuring out what user has the hold message flag set in this case? These messages are showing up for every bulletin message my node receives and almost

It is TCP over IP Herbert.? Just on my local LAN. Willem, those Telnet commands don't seem to be the issue, but it was fun playing with netcat! I haven't done that in a while.? Echoing the full hex

Hi Jim, Yes that was the first thing I did, that is the sort of thing one forgets :) PORT PORTNUM=1 ID=144.9375 MHz 1200

I have this connected to my allstar node and monitoring when at home. Ray N3HYM

Hello Jim, It should just require changing VARA to VARA500 in that statement. 73, Lee K5DAT [email protected]> wrote:

Is your kpc3 in xkiss mode? Here is part of my config file for my kpc3 kiss port PORT PORTNUM=1 ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ; Port number ID=VHF 145.090 MHz 1200 bps ? ?

How can I change this to show bw500 instead of bw2300? WL2KREPORT PUBLIC, api.winlink.org, 80, KI0BK, ? ?EM28OU, 00-11, 03597500, VARA, 50 tia 73 jim KI0BK

Hi Jim, I have only one user so far... This is on Port 1 VHF and using Kantronics XPC 3 TNC Will post log next? time... All the best from Alan

“if a caller calls the system” Using what mode? ?Can you post your BBS log of the failed attempt please! is this every attempt by every user or just one user?

Hi Everyone, Interesting problem, if a caller calls the system, you hear it trying 10 times then gives up During that time,? if I go into terminal and do MH 1 it comes back with the caller call

Thank you everyone, Now have MH 1 working All the best from Alan & Thank you all

Hi Steve As you may have seen to my reply to? mark, time to get leads done and connect a radio and tnc and call the node myself... all the best from Alan

Hi Mark, I think the only way round this problem, is get the cables down to hook an other tnc to an other radio which I have And prove it my self... all the best from Alan

Ok then, I was way off... Same applies. Use a monitor of some sort to actually see the traffic being decoded.? Once it is decoded then if it does not appear in the MHeard list you may really have

Alan Your nearest node GB7ELE is on 950 Are you sure you've ever decoded any signals? Do you see them in the qttermtcp monitor window? Ssvemh command at the node will save mh for a restart. You can

Thank you Danny That would be most helpfull All the best from Alan

Hi Mark, in the UK we use 144.9375 All the best from Alan

My Call Sign G0WDA - Location Blackpool UK - g0wda.co.uk is there a signature I can add this into please. All the best from Alan