开云体育

For incoming connects the port should already be logged. I see this: ?Incoming Connect from GB7BPQ on Port 6 Freq 7050950 Mode ARDOP 500. Are you asking for this info on outward connects as

This is occurring using RF only not telnet. We are calling the node first it will respond but when we issue a command like "?" or "BBS" it would disconnect. We are also call the BBS directly by its

Thanks John, I'll keep using the session timer. -- 73, Mark, N5MDT Montgomery, Texas http://n5mdt.ham-radio-op.net:52852

It looks like Direwolf is rejecting an XID, but a SABM is sent afterwards so it should still work. Could you post a bit more of the trace? Is this a normal level 2 connect or is it between nodes, and

You can't set a minimum bit rate but you can set a maximum session time using SESSIONTIMELIMIT. 73, John

John, is there a way to either set a minimum bitrate level in a Vara port, or connect script, to prevent connections that go on for an excessive amount of time? And can the value be read periodically

I recently upgraded to the .65 linbpq version and I am receiving reports that they cant connect to our BBS. It would just disconnect if connecting via the node to BBS or directly to BBS via alias or

I am Digipeating APRS traffic in two different frequencies. I was in the impression this would work with this configuration but I am seeing port 4 digipeat beyond WIDE1-1 like port

John, is there a way to add the port number from which a connection is made in the BBS log? If I had the ability to extract by port number it would help diagnose some things.? For example, I would

Thank-you for pointing me back to enabling KISS in WinRPR. When I enabled it previously, I misread the message in the attachment and thought I had actually disabled it. I guess it means that the

WinRPR uses WA8DED Host Mode, and with that the monitor does not differentiate between TX and RX frames. When you tried KISSHF did you enable KISS mode in the WinRPR config? 73, John

On Mar 13, 2025, at 8:54?PM, Gordon Gibby KX4Z via groups.io <docvacuumtubes@...> wrote: ? Some of these things I don’t understand. In our county, if you want to be involved in

Some of these things I don’t understand. In our county, if you want to be involved in serving in a disaster, you are 10 trillion more times likely, if you have been affiliating with those who are

if you can connect consistently with a digital hub in the east or west then you send it to them if make arrangements with a station then you send it to them your choice nobody else

That’s what I’m saying

Well, there isn’t a “rule” but if you want any guarantees that your digital traffic will actually get to its destination you might want to forward to one of the known digital hubs. Otherwise it

Mark, that may have been it, the far end was set to B2, my end to B1, setting both on my end worked for first test. ?More testing needed, but looks good. ?I’ll update when I have done more

What rule says I got to go through KE5YTA you can forward traffic to any station that you are able to have a consistent connection with

You should be connecting to KE5YTA for NTSD/DTN traffic. He is the South Central Area Digital Traffic (Net) hub. His QRZ info is good. 73 de W4DNA - Dave 4RN Digital Hub

Try here https://nts-digital.net/mw/index.php/Pactor_Modem_Setup Ray N3HYM