开云体育

I am Digipeating APRS traffic in two different frequencies. I was in the impression this would work with this configuration but I am seeing port 4 digipeat beyond WIDE1-1 like port

John, is there a way to add the port number from which a connection is made in the BBS log? If I had the ability to extract by port number it would help diagnose some things.? For example, I would

Thank-you for pointing me back to enabling KISS in WinRPR. When I enabled it previously, I misread the message in the attachment and thought I had actually disabled it. I guess it means that the

WinRPR uses WA8DED Host Mode, and with that the monitor does not differentiate between TX and RX frames. When you tried KISSHF did you enable KISS mode in the WinRPR config? 73, John

On Mar 13, 2025, at 8:54?PM, Gordon Gibby KX4Z via groups.io <docvacuumtubes@...> wrote: ? Some of these things I don’t understand. In our county, if you want to be involved in

Some of these things I don’t understand. In our county, if you want to be involved in serving in a disaster, you are 10 trillion more times likely, if you have been affiliating with those who are

if you can connect consistently with a digital hub in the east or west then you send it to them if make arrangements with a station then you send it to them your choice nobody else

That’s what I’m saying

Well, there isn’t a “rule” but if you want any guarantees that your digital traffic will actually get to its destination you might want to forward to one of the known digital hubs. Otherwise it

Mark, that may have been it, the far end was set to B2, my end to B1, setting both on my end worked for first test. ?More testing needed, but looks good. ?I’ll update when I have done more

What rule says I got to go through KE5YTA you can forward traffic to any station that you are able to have a consistent connection with

You should be connecting to KE5YTA for NTSD/DTN traffic. He is the South Central Area Digital Traffic (Net) hub. His QRZ info is good. 73 de W4DNA - Dave 4RN Digital Hub

Try here https://nts-digital.net/mw/index.php/Pactor_Modem_Setup Ray N3HYM

I've uploaded new versions of LinBPQ and BPQ32 to my Beta site and github. These should fix the problem with the Mail ISP Interface configuration. It also sorts the Routes lists and adds a prototype

The PSK and FSK levels are right there on the Winlink Express Pactor settings page, along with the delay settings which you already have.? So if it works on WE you should expect them to work in

I still get the one green light then solid green until it times out. I am pretty solid that this is some kind of timing issue, but not sure how to remedy it. I have no clue why it would work with the

I will give those settings a shot. -KQ6UP Thanks, Chris Maness -Sent from my iPhone [email protected]> wrote:

Thanks, Yes, I'll be doing the Linux version today. 73, John

1) The WINRPR driver works, but QtTermTCP shows the same (Rx) color in the monitor for both transmit and receive. I don't see that on any other ports. It's a minor but strange thing. Despite not

PSKA an FSKA level can not be the same, PSKA levels will be 30 higher than FSKA settings. Google pactor level settings , there is a whole article on it. My BBS runs PSKA at 225 and FSKA at