开云体育

Yes Mark. I also have the ip address on the Pi set as static.

Does this mean that you changed the port forwarding in your router to point to the new Pi IP Address? -- 73, Mark, N5MDT Montgomery, Texas http://n5mdt.ham-radio-op.net:52852

Not sure if I said that I can connect to the services from inside my network.

Thanks guys, No iptables set on firewall installed. Used different ip on the new Pi, cleared all the old open ports on original Pi and re-opened them for new one. Have rebooted the entire network

Hello Glenn, If the new Pi is using the same IP address as the old one, you may want to reboot the home router in order to clear out mac and arp tables. 73, Lee K5DAT [email protected]> wrote:

Checked iptables or firewall, whatever the Pi uses now? -- 73, Mark, N5MDT Montgomery, Texas http://n5mdt.ham-radio-op.net:52852

My Pi4 running my LinBPQ node was going bad so I replaced it with a new Pi4 and a fresh copy of Pilinbpq. After finally transferring the mail, users & wp data the node came back on line. However,

[email protected]> wrote: It's all rig control. It's a matter of using either the old method of configuring rig control as part of the port configuration or using the new method with a stand-alone

John Got it to work ..had to move the radio block to itself and not inside the port config block doh

no joy had to go back to rigcontrol thanks will try again when the patch is available

Hi, How do others deal with the "Unread mail" generated by housekeeping in these scenarios? Since I am using CLAWS mail, having the system report mail is unread in X days is not really accurate tho

Actually it can be either case but there is a bug in the code and it won't work without a TNC Mode parameter (eg P1 or VN). I'll fix it but the mean time it should work with a dummy Mode TNC Mode

Try Chan70, The "an" needs to be in small letters. 73, Ken W9GM From: [email protected] [mailto:[email protected]] On Behalf Of Robert Cartier via groups.io Sent: Saturday, March 1, 2025

Hi I see in the docs that the use of CHANXX is valid and I have successfully used it in rigcontrol but what would like to move to RADIO X IN the docs the example RADIO 1 COM6 9600 ICOM IC718

Thanks John ??? Works great as long as I don't try to add more than 5 calls.. 73? John? wb4moz

Normally VARA uses the bode all and first 4 applcalls but you can supply a MYCALLS parasm to the VARA config to override this. 73, John

Thanks, I'll check it next time I am over there and let you know if that is the issue. 73//Dave WB9YIG

Try this.... Install Vara into a separate directory. Use different ports in the Vara configuuration. Create a new Vara Port. In that port start the second instance of Vara. You will need to include

WA9C shows as a registered and valid call so... In the Telnet Port configuration of the bpq32.cfg file the value of CMSCALL should be WA9C. It may have been mistakenly entered as

Hello folks; I inherited the sysop duties from a SK. The system is operating on a Linux computer with packet only. I noticed that when I start LinBPQ I receive a message that says: WL2K Traffic