开云体育

If you are referring to netrom in Linux, the info available via this link might be helpful. https://www.elite.uk.com/mike/posts/linux-netrom-setup/ 73, Lee K5DAT [email protected]> wrote:

The original NETROM was an eprom for the TNC2 that was sold by Software 2000 ( if I remember correctly). As far as I know it is no longer available. TheNet was an (allegedly illegal) copy. Not sure

NetRom is a routing protocol that is part of all the different bbs software packages. -- Charles J. Hargrove - N2NOV NYC-ARECS/RACES Citywide Radio Officer/Skywarn Coord. NYC-ARECS/RACES Nets

Hi all, Anyone might now where I might locate Node software called Netrom?? Angelo

That makes sense. I’ll keep checking. It probably isn’t setup for frequent refreshing/syncing considering these server stations are typically not moving around. Thanks, LCM

I don't think so.? It will just take a while for the change to be reflected on APRS.? I don't know what their update timers are.

Thanks, Mark. I found the old grid square in the WL2KREPORT section of the bpq32.cfg file. I changed it to our new gridsqare but the node is still showing up with updated time stamps on aprs.fi with

Winlink gets the position from your WL2KREPORT configuration line in your bpq32.cfg file, or from your RMS Packet program (if that's what you use.) You don't need to do anything for APRS.? It will

http://vps1.g8bpq.net/

All: Is there an issue with the online BPQ Network Map? The site loads but there are no stations. Tony -K2MO

We are moving our club BPQ packet station to a new site. I tried updating the LOCATOR to the new grid square and I changed the BTEXT to the new lat/long but I can't seem to get the location to update

Thank you! LCM

Yes, there is also a port specific beacon, set in the ports section of the web management interface and stored in UIUtil.cfg 73, John

We are moving our club LinBPQ node from one site to another. As such I need to change the Beacon text to correctly show the new site. I have tried editing the ~/linbpq/bpq32.cfg file and restarting

Sounds Good Mark, I thought i was crazy when sysops were telling me they couldnt see me or that i kept dropping them, when all of mine clearly showed node tp node connections. once things work i leave

Here is the log of the P message received addressed to me, N5MDT from K7EK. 240911 17:20:59 |K7EK ? ? ?Incoming Connect from K7EK 240911 17:20:59 >K7EK ? ? ?[BPQ-6.0.24.42-B12FWIHJM$] 240911

John, can you check the code for "Send P Msgs to more than one BBS " and be sure it works as intended. Gary, K7EK, and I sent several messages back and forth today to confirm what was happening, and

Glad you found and corrected a problem.? You had a lot of us thinking we were crazy! Do you want to re-establish our link again? I know I was pretty rough on you in emails trying to convince you

Just Updated correctly to 6.0.24.42 YOU ARE CORRECT MARK SOMEONE ONE HAD TOLD ME TO REMOVE BROADCAST NODES A FEW MONTHS AGO while we looked for something. it has since been replaced. WIerd however

Hello Gary; Im showing you K7EK in Links, Routes, Nodes as a Node to Node etc. Has been a very stable connection here. To make matters worse I just found the correct 6.0.24.42 update file dated