开云体育

Are you using the scanstart command in your forwarding scripts?

Thanks for your reply. I figured it would, as I have a workingTARPN node, running Nino's with LinBPQ. Turns out that the serial port naming convention was confusing.I initially put COM9 instead of 9

The NinoTNC works just fine with windows bpq. I don’t have access to my configuration right now, but if my memory is correct, you just set it up like a Kantronics KPC3 in kiss mode. I don’t

Thanks mark the log file told a story... :) all is well again at K9CTB!!! Thanks

THANKS Brad.. Found it was a simple typo in the forwarding configs…. Fixed!!! 73 Jerry N9LYA Sent: Saturday, September 7, 2024 2:37 PM To: [email protected] Subject: Re: [bpq32] Helping

Mine are in C:\Users\*username*\AppData\Roaming\BPQ32\Logs 73, Bradd W9LCF -- This email has been checked for viruses by Avast antivirus software. www.avast.com

Good afternoon John, As I was assembling logs and config files to send to you, I decided that I would increase my MAXLINKS and MAXROUTES settings. Problem resolved. I had been decreasing them as

Hi Mark, Been so long since I setup or troubleshoot a windows BPQ setup... I know I have dealt with this before. and is a silly typo somewhere... Remind me where to find log files... Linux has

After further thought, attempting to attach to a port from another session when the same or an interlocked port is already attached does get denied, so I could modify the script to use that as a check

Hello John, I noticed that if I attach to a port, which stops scanning temporarily as expected, and then connect via a different session and issue "radio n scanstart", scanning begins even though

Good morning John, I'll pull the logs and screenshots and send them to you. Thanks! 73 Chip N3FUD [email protected]> wrote:

On the first, qDebug(datas.data()); displays the return value from the call to FLRIG. This can show a successful operation as well as any errors , so isn't really equivalent to qDebug() << "SetPTT

https://www.cantab.net/users/john.wiseman/Documents/APRSDigiGate.html See info above. Ray N3HYM

It appears to come from SERVIC. 73, Eric WG3K FM18rp Packet: WG3K@WG3K.#SMD.MD.USA.NOAM E-Mail: wg3k@...

Who is successfully running Windows BPQ32 with a NinoTNC? ?I would like to try one on my system. They run great on Rpi with LinBPQ (TARPN), but I have not been successful with Windows BPQ32. Would

Hello Dave, Been retired from Debian for 14yrs now so unsure how you are going about the "hardening" effort and hope I am not wasting your time with this but FWIW the?stock source for .72 builds

Hi all, I've been fiddling with hardened builds on QTSM .72 - to get it to build on debian bookworm, I had to edit this specific qDebug call [1] - John, is that the correct error message? I've been

Wow Chars! I just wanted to comment on the word CHARS. Now we know John is a super computer administrator or even a super computer himself? (Humor) the word chars was and still is used in high speed

How does the held message look in manage messages and the message list? Normally from call is limited to 6 chars but if it appears ok on the list and can be read once unheld I'll add the

SERVICE is now being used to alert users of pending messages from users that aren't on your allow list. A message from 'user@...' with subject: '//WL2K R/Test' and approximately 409