开云体育

There aren't 64 bit versions of bpq32.dll, BPQMail.exe or BPQChat.exe. It is possible to build LinBPQ for Windows in either 32 or 64 bit versions. 73, John

Hi all, I was snopping around into my partners' nodes and I found this: BEDNOD:GB7BED-5} Version 6.0.24.33 (64 bit) Is there a 64bit version for Windows ? I did some reasearches in the mail

use crontab @reboot /root/bpq/run.sh -------- run.sh #!/bin/bash # cd /root/bpq if pgrep -x "linbpq" > /dev/null then kill $(pgrep -x "linbpq") fi sleep 10 ./linbpq >/dev/null 2>/dev/null

The other copy of linbpq that is running might have been started as a service. Check /etc/systemd and look for any likely suspects. e.g. bpq.service or linbpq.service etc. Also, run the following

As Todd has has mentioned Alias is limited to 6 char but it also can't include a - character. Bind Error 98 almost always means you have another copy of linbpq running. 73, John G8BPQ

First, nodealias is limited to six (6) characters. Try changing NODEALIAS to NFDNOD and see if that clears the error. This is likely the issue Todd 73, de Todd N7TRY [email protected]> wrote:

I am in the planning stages of adding VARA to an up and running LinBPQ site that is using Direwolf for VHF. Our intention is to use a CAT controlled radio that has yet to be acquired. On my test

Problem Solve. 73 de Jean VA2OM / VE2PKT -

Thank you John, I did have INTERLINK=1 in both ports but I moved the line up under the Driver line in the ARDOP port, same location it is in on the VARA HF port, works fine now. Glenn/N3MEL

Glenn, Have you set the same INTERLOCK value on the VARA and ARDOP ports? That is how BPQ knows they share a radio. 73, John

Current Config file - Original config only differed by having the silent key station listing in mapping... =======Config File Start Paste====== ; Configuration sets created by Greg N3BYR ;SIMPLE ?

Good Morning, I wanted to at least drop a note about an issue I ran into with the latest iteration of BPQ32. While I found a way to resolve it, I'm unsure that it's known or if it may just be my

Any one else have this error? 23:40:16 10 *** [1] Secure login failed - account password does not match. - Disconnecting (166.62.170.54)<cr> 23:40:17 10 *** Protocol Error - Line should start with

Setup here: Pi4 running pilinbpq w/WinmorControl over to IC-7300, VARA HF, 300bd & ARDOP on a Windows machine. Rigcontrol is configured in the VARA HF port #5 ARDOP is port #12 I can not get the

Hi, John: Marvelous. There is a chance. 73, Chuck

Thanks, John. 73 Em dom., 9 de jun. de 2024, 03:04, John G8BPQ via groups.io <john.wiseman= [email protected]> escreveu:

port 80 73, John

Nationwide and Worldwide Packet Radio Directory Map links located at the top of www.ww2bsa.orgBest viewed with a large screen (ie: try not to use a cell phone.)Labor of love and an ongoing work in

Wow! I am loving this progress. :-) 73, Chuck

John, I would like to ask - which port should I use for api.winlink.org in WL2KREPORT line? I've seen them use several different ports. Em sáb., 8 de jun. de 2024, 12:23, John G8BPQ via groups.io