开云体育

That would be most helpful if you could please. Another approach might be for me to work out how to filter them in rsyslog.conf Cheers Tom

Thanks John, I'll test it later on and let you know how I get on Cheers Matthew

I've found the problem. The latest build in Beta (.64) should fix it. 73, John

There is no way to stop these being written. They are primarily for debugging, so suppressing them will only be a problem when something goes wrong. Maybe I should add a debug level option 73, John

Hi I'm looking to reduce BPQ's syslog output in order to preserve the life of my Pi's SD card. (I don't wish to move to temporary logging or a read-only filesystem.) I see many lines like May 21

Thanks, Matthew. That is a great help. 73, John

Hi All, Nino KK4HEJ has kindly done some analysis and said the following: Hopefully that gives you something to go on. Cheers Matthew

Is there a way to add an application line that will let you connect to a node and then issue a command once connected? Exsample? ? C MELNOD (then add cmd TALK) -- Apologies for any grammar?or

Hello We have multiple nodes running LinBPQ and I am interested in automating backup of all nodes to a central FTP site. Beside de config bpq32.cfg what other files should be backup so if a new image

Hi John, I'm using 64 bit Windows 11. Thanks Matthew

Matthew, I can reproduce the problem on my Pi 4 (64 bit) but not my Windows machine. What platform are you using? Thanks, John

Hi Red, Thanks for spending the time to verify and document the issue. Much appreciated Matthew

For reference: Here is me reproducing the bug Matt reported: https://youtu.be/4b6rMaipMfI Note: 1200 baud tested in video, but also tested 300 baud as well, same results. 73 Red

Matt, John- I opened these files and cut the static out and then played them over the radio and managed to decode only the FX25 packets, the standard AX25 do not decode at all so same findings as

Hi Red, Latest recordings attached, unproto frames with the 80 char string " FqWFkDtfi7m81dnPDb0kFqWFkDtfi7m81dnPDb0kFqWFkDtfi7m81dnPDb0kFqWFkDtfi7m81dnPDb0k" Just to clarify the other recordings were

To my ear that doesn’t sound right. There’s maybe a missing tail as well. Could you record some longer packets, possibly unproto with 80 chars. I have a hunch that unproto might be a different

Hi all, It looks like both those packets might have had FX.25 enabled. Please find attached a new recording with FX.25 Disabled that the NinoTNC can't decode. Nino KK4HEJ has also tested the packet in

Extra decoders are set in the Modem config tab in the Add Rx n pairs box. These are not needed on FM. On SSB tuning has to be within about 30Hz for packets to decode successfully. This amounts to a TX

Hi Matthew. Both recordings sound the same and look the same on Audacity, and both decode on both the original Soundmodem and QtSM. The packet is too short to be send as fx25, so I'd expect them to be

Good stuff, Can you record the same test output from Direwolf? Cheers Red