开云体育

You could run additional ports on the same QRG and remain compatible with Net105, if you flip sideband:

On Sat, May 13, 2023 at 10:18 AM, Christopher Molnar KO4YAW wrote: Here is a demo of how to set up monitoring in QtTermTCP https://youtu.be/Tl8VxafJskA 73 Red

Wondering if someone would be able to point me in right direction. I like hanging out on Net105 as there is a ton of activity there. But, I would like to participate in another net that has BBS to BBS

I redirect my direwolf output to a file using a standard redirect. It's something like "direwolf -c /path/to/config.conf > /var/log/direwolf.log"

Thanks John, I deleted my first post as I had asked the question way back and had missed your response. My apologies for re-asking the same question. All set now. -Chris K04YAW

Not directly. You need some form of terminal program. I suggest QTTermTCP. 73, John

RADIO 3 is looking for the radio associated with port 3 and KISS ports don't support Rigcontrol. To access the rig defined as RADIO 3 you use RADIO R3. Either way, f is invalid, as it is interpreted

Good afternoon linbpq experts! I am wondering if there is any local (logs, monitor, etc) way to monitor exactly what your radio is broadcasting / receiving while running linbpq?? Runing Ubuntu server

I use ?ISHOST=noam.aprs2.net -- Ray Adkins │ American Red Cross Ray V. Adkins N3HYM│ American Red Cross Disaster Service Technology Team Lead National Capital and Greater Chesapeake Region (240)

Appears ok unless there is some specific error of spacing I suppose- https://www.aprs-is.net/APRSServers.aspx

My entire APRS cfg sections began this thread- I adjusted the host recently based on another user here who posted their cfg. Mine was having same issue before I adjusted. Does this look normal? Thx.

Thank you, sir. That's the sort of thing I was hoping to find.

Hi John, Did you have chance to look at this one? Thanks Matthew 2E0SIP

You may have found a new bug. You should be able to get some debugging info by running linbpq under gdb (the linux debugger). See message #37092 for details. If gdb isn't installed on your system you

What host name are you using? Have you checked it for typos? 73, John _____ Sent: 11 May 2023 23:51 To: [email protected] Subject: Re: [bpq32] BPQ APRS igate setup questions #aprs Port forwarded, Pi

Port forwarded, Pi restarted (has static ip, DDNS, and been forwarding 8010, 8011, 8012, and 10093, etc for years), but still getting "APRS Igate connect failed". Forwarding working I am able to get

yes

Interesting info- so I can assume the codes do not expire- thanks. I am still looking for what could be causing "APRS Igate connect failed"

Is there any solution to segmentation fault crashes like installing a fresh pilinbpq or other method? I do not have any method of detecting crashes and restarting BPQ- I just don't have the knowledge

Thanks John!!