开云体育

Correct. PERMITTEDAPPLS , despite its name,? was designed to meet the UK licencing conditions, which can limit the use of certain calls to certain frequencies. It isn't intended to to prevent

KISS over TCP is treated by the Node the same as Serial KISS, so PERMITTEDCALLS should be applied. 73, John

I am interested in this too.? If I understand what you are saying John... I have a DXCluster app available on my node (command is DXC), Its SSID is WE1H-5 its alias is MMKDXC.? It is defined as

Well...I get RADIO 7 14.1075 LSB F1 W Sorry?-?Set?Mode?Command?Rejected Rick VA7RBP

The fields in a RADIO command (unlike scan lines) should be separated by spaces - RADIO 7 14.105 LSB F1W 73, John

Hi All I'm having some trouble trying to set up Rig Control using PILINBPQ VER 6.0.23.63 Radio is ICOM IC-756PROIII It appears that the only parameter that gets sent to the radio is the frequency,

This was working after all. I was just not getting the yellow and green color codes in the web GUI like I do for personals and bulls. Thanks, Chris KQ6UP

I am noticing that some traffic may be looping because I have NTS* as my outbound partner is the same as my inbound forwarding partner for NTSCA. I am wondering adding an exclamation mark in front of

This is my current Port config: PORT PORTNUM=3 ID=DirewolfVHF ;WinLink Gateway 145.030MHz TYPE=ASYNC PROTOCOL=KISS IPADDR=127.0.0.1 TCPPORT=8001 CHANNEL=A PACLEN=128 TXDELAY=500 FRACK=7000

Good Morning John, I think I may be a bit confused on your response, the only mode I have on HF is AX.25 300bps by way of Direwolf (via TCP) on another machine that handles the HF radio so I assume

PERMITTEDAPPLS only affects incoming connects on ax.25 ports. It doesn't affect the list of applications that is displayed by the Node ? command 73, John

No, it isn't possible to set a path for ID message. You can achieve a similar effect using beacons. 73, John

Jim - if there is a way to do it with the IDMSG: directive in the bpq32.cfg file I do not know or have long forgot how. My bpq32.cfg simply contains IDMSG: *** I then set the text and a digi using

If its possible, how do I specify a digi path for the IDMSG?? My VHF port is port 1, and would like to have the IDMSG digi'd through another packet station. Jim KI0BK

Yes, I have much of that going already, but I am not having luck with the zip code in the to: field. I get matches say K6HTN lives in 91104, and she gets tons of messages. I forward her matches to a

I have FBB attached to via a BPQ VirtualTNC (KANT Hostmode), I can connect just fine to the BPQ switch and beyond from FBB, but can I configure the converse? Thank you in advance, VY 73 de Chris KQ6UP

I seem to be running into an error where all the applications are listed on a port (in this case specifically the port assigned to HF) instead of only the permitted applications. Is there an

From my experience, you can't take the sdcard from a "3b" and put it in a "4" - it wont run ? Dave gm3yew - "jdfiberops@..." <packet@...> wrote:

Not enough info to provide any definite answers, Your pi may now have a different IP address as each network interface has a unique MAC address which is used by the automatic IP DHCP service on your

Thanks for the heads up! 73, Matt, WE1H Matt Atwood Merrimack, NH Phone / Text: 802-999-1994 Email: <mailto:we1h@...> we1h@... Web: <https://www.we1h.com/> www.we1h.com Sent: Tuesday,