开云体育

Hi all, If it’s not clear to anyone reading, I have —-commented—- where it looks like it is going wrong and what should be expected as normal behaviour. Connect from TNC with "c g6fji" 10:27:03R

Easy sleuthing in this case - edit things then run "ls -lsart /usr/bin/linbpq" and see what files changed most recently :-) Assuming it's your own location you're trying to change, you should be able

Thank you Martin. Location entered on that screen does affect Map Popup, however, has no effect on QTH - at least with my setup. BUT editing /usr/bin/linbpq/STUsers.txt as you directed WORKED! You're

In the web interface, there's this map position field under "Chat Mgmt" then "Configuration" - is that what you're after? This gets written to?/usr/bin/linbpq/chatconfig.cfg Individual user locations

Thanks John. I could be looking and not seeing "actions, update" - or that capability is present for Windows, and handled differently in Linbpq. Still searching. jer Sent with [Proton

I see the same behaviour.? Traces below are from linbpq running on Ubuntu as G6FJI and a Tiny-2 TNC running as G6FJI-3

Unfortunately this is continuing to cause some issues, both in terms of users connecting and also BBS to BBS connections which just hang on occasion. Is someone able to confirm if they see the same

Jerry ?In the chat window goto actions-update chat map info.. 73? John? wb4moz

For purposes of editing, from where is the Chat QTH sourced?? The Chat screen QTH does not match anything I have so far found. Thanks group! Jer K4WOF

I believe this is the needed format IDMSG: Network node (BPQ) *** 73, John

Red wanted to thx you for the help !!!!!

?Thanks Steve, I’ll do more monitoring, as I’m trying to figure out what is missing. I know one of the stations in the above heard list is also running bpq, so something is different about his

Jim As far as I remember Kamtronics nodes were populated by the node ID beacon text not the netrom nodes broadcast. I cannot remember the exact format but monitor the freq. for the others you hear and

I'm working to get my linBPQ node configured, I can see the nodes list being sent on my vhf packet port KI0BK-7>NODES/V:{CF} ?KSOLA

That would be awesome John! -- 73, - Matt, WE1H we1h AT arrl.net http://www.we1h.com

reconfigured with your suggestions and it worked just fine thx you !!!

Went back to buster 32 lite pi version... did all the updates and upgrades... rebuilt the bbs with the ardop port... Magic it all works now... Thxs for the HELP !!! :) Guy

Yup, 6.1 kernel, so you may want to try the workaround. When launching ARDOP itself (piardopc) the command looks something like: ./piardopc 8515 ARDOP2IN ARDOP2OUT —snip— Adjusting the LEADER

Linux bbs 6.1.21-v7+ #1642 SMP Mon Apr? 3 17:20:52 BST 2023 armv7l GNU/Linux

Hi John, Antennas are about 50 ft a part running 5 watts.. has to turn on the attenuators to bring sig down to a 40 over 9 sig....