开云体育

Absolutely. Open Winlink Express Open a Telnet Post Office Session Click Add Server Click UPDATE AREDN MESH NODE LIST This only works if your node is connected to the mesh network properly. Mark

Super cool! Works fine in (pi)linbpq. Thanks.

Here is another link: https://wavetalkers.com/pdf/Winlink_mesh-v1.2.pdf

The resolver converts host names to pi addreses. Can be viewed in the Windows GUI or via the node command AXR axr 1 BPQ:G8BPQ-2} AXIP Resolver info for Port 1 GM8BPQ-11? = 192.168.1.199 0 =

Attached is a 1 minute video segment from a video by Orv Beach w6bi. (2.5 MBytes) In addition to 'auto-discovery' by Winlink Express... My 'Winlink Post Office' on my AREDN network server only

I hope you asked permissions before adding maps to those as they must often be reciprocal for them to work. If its a bunch of copy pasted maps from somewhere this is not the way to go about linking.

Chuck: hidden command: AXR(esolver) <port> Gives list of maps configured. 73s Red

https://wavetalkers.com/resources/digital/winlink.php "4 - Session Types - - - - Mesh" Click on 'Mesh'.

Interesting question, I’m an ardent AREDN MESH user, and ARRL Tech Spec on the subject. The RMS servers are on the Public Internet, AREDN is not. BUT, you can bridge to public internet from your

All: What is an 'AXIP port resolver' ? 3s, Chuck

Yes. --

The most likely is a problem with your AXIP port config. Do you get any error messages in the console window when you start BPQ? If not, if you send me the AXIP bit of your bpq2.cfg I'll check it out.

Provided that somewhere on the ARDEN network there is a node with Internet to access an RMS Server then yes. 73, John

Well i wanted add some routes to my AXIP route and the new ones do not work. Nothing shows up in my AXIP port resolver or the MHeard window. The person I am mapped to sees me in his port resolver abut

Mike: Thanks for all the help on this issue. 73 - Rick

Hello Can a LinBPQ connected to a AREDN node provide a RMS service via AREDN? -- Gracias 73, Heber NP4JN

Hello Group John added a update to his Beta URL, there was a problem with the commands NOD ADD or DEL using BPQ Terminal Sysop Command 73 Mike Melnik-N9PMO BPQ32 Group Moderator

Rick I see the same from time to time, I think it may pop in there from the BPQ32 Node Quality Normalizer but usually is from another node other then mine, the BPQNODES.DAT file I sent the rest of the

From time-to-time, I see some nodes exhibiting what i call the "255 error".? ?I lose without notice, an AXIP link to some of my partners, and see the link from my node to my partner's node up, but

HI That seemed to be the final part.? I had tried it before and failed, but failed to recall I had something else using that serial port at the time and forgot to disable it.? Thanks again! 73 Kayne