开云体育

Chuck: hidden command: AXR(esolver) <port> Gives list of maps configured. 73s Red

https://wavetalkers.com/resources/digital/winlink.php "4 - Session Types - - - - Mesh" Click on 'Mesh'.

Interesting question, I’m an ardent AREDN MESH user, and ARRL Tech Spec on the subject. The RMS servers are on the Public Internet, AREDN is not. BUT, you can bridge to public internet from your

All: What is an 'AXIP port resolver' ? 3s, Chuck

Yes. --

The most likely is a problem with your AXIP port config. Do you get any error messages in the console window when you start BPQ? If not, if you send me the AXIP bit of your bpq2.cfg I'll check it out.

Provided that somewhere on the ARDEN network there is a node with Internet to access an RMS Server then yes. 73, John

Well i wanted add some routes to my AXIP route and the new ones do not work. Nothing shows up in my AXIP port resolver or the MHeard window. The person I am mapped to sees me in his port resolver abut

Mike: Thanks for all the help on this issue. 73 - Rick

Hello Can a LinBPQ connected to a AREDN node provide a RMS service via AREDN? -- Gracias 73, Heber NP4JN

Hello Group John added a update to his Beta URL, there was a problem with the commands NOD ADD or DEL using BPQ Terminal Sysop Command 73 Mike Melnik-N9PMO BPQ32 Group Moderator

Rick I see the same from time to time, I think it may pop in there from the BPQ32 Node Quality Normalizer but usually is from another node other then mine, the BPQNODES.DAT file I sent the rest of the

From time-to-time, I see some nodes exhibiting what i call the "255 error".? ?I lose without notice, an AXIP link to some of my partners, and see the link from my node to my partner's node up, but

HI That seemed to be the final part.? I had tried it before and failed, but failed to recall I had something else using that serial port at the time and forgot to disable it.? Thanks again! 73 Kayne

Try without PTT_SETS_INPUT on the KX3 port. That is for radios with built in soundcards. But it should work on the 7100. The software should append a "T" to the Rigcontrol display when it tries to

My apologies for taking up time on the list.? I cannot recreate the problem today.? All works as it should.? I hate it when something seems to go wrong and then I can't recreate it but we'll see

Hi, Ok Thanks for your update.?? I got the Interlock and radios aligned.?? BPQ reads the status of mode and freq fine but presently this wont key the rigs on QTSM or winrpr.?? I was using USB

I've just checked and I haven't uploaded the latest rigcontrol docs. I'll do that when I get home. Basically the number after RADIO needs to match the INTERLOCK param in the port config. Yes, just use

The first unit sold, so here is this weeks listing, it has the same specs, Rom v8.2, Ram 128k, RTC added, refurbished / re-Capped. https://www.ebay.com/itm/304558884827 TNX es 73 Jim KI0BK

Hi John, As always you are spot on, I worked this up into my config yesterday and works well. I am off to try to find more docs on the new "Radio" stuff.?? I want to add the other radio to the mix