开云体育

That isn't mine so I'm afraid I don't know. 73 John

John, I used this one for Teensy 3.6 as a HAT for raspberry pi. Is this the latest one? https://drive.google.com/file/d/1S8vOmXl4Ubwm9RigilrPaSzVv6o1mvSr/view?usp=sharing Thanks Frank KO4FQW

The hex file for a Teensy 3.2 using the serial port on the Pi is http://www.cantab.net/users/john.wiseman/Downloads/Beta/SM_Teensy.Serial1.TEENSY31.hex The source is at

As a newbe i can't seem to find the latest stand alone fIrmWare for the PI Teensy TNC . I run version 6 and have some issues. can someone point me to the location of the hex file or source code. 73's.

Here's the link https://www.kenwood.com/i/products/info/amateur/ts_590g/pdf/ts590_g_ft8_settings_en.pdf Ray N3HYM

I found a guideline for the ts590s running ft8 , and followed those recommendations on setting up the menu items . Ray N3HYM

Watching ...

This document should help: Linbpq + VARAFM on Linux with Wine <https://docs.google.com/document/d/1wkOhtTtpdvjFjBVm9xAMRV-pWem64HQRMoRm91mwGDw/edit?usp=drive_web>

Ok, Carmine. Interesting, as Chrome works fine here. Have you seen the QtTermTCP docs? - https://www.cantab.net/users/john.wiseman/Documents/QtTermTCP.html 73, John

Hi Doug, Could you share some knowledge how to run VARA on Linux, please? I've made attempts using wine but I got stuck. I am sure it's necessary to make some library replacement using winetricks. --

Anyone running a TS590S with bpq32 windows ver .26 ! What menu settings have to be changed or turned on in the radio ? TNX Ray N3HYM

John: Chrome. I was researching that earlier today and have to figure out how to install it.? Another local ham is using it and has had good success. Thanks. 73 Carmine, K3CWP

Ok, I'll check into that and see if I can find what could cause it. Thanks, John

OK, I fleshed it out further. The problem is only with Port 1. I can save changes on other ports. Screenshot of how it looks before attempting to change: [image: image.png] Then edited the path

The message is warning you that you need to be signed in - it isn't saying you aren't signed in. So long as you are on 127.0.0.1 or signed it it will save. If not, you get an error message "Not

In PiLinBPQ in the web interface when I select "Ports" and then "Beacons" on any port, I get the message above saying I need to be signed in to save changes. I get this message even after signing in

HI Ray, Looks like that did the trick. Thanks --Brian WD9HXC Sent from Mail for Windows 10 Sent: Saturday, February 20, 2021 9:25 AM To: [email protected] Subject: Re: [bpq32] BPQ32 beacon only

I just tested it and it did transmit when I clicked test, so far so goods Sent from Mail for Windows 10 Sent: Saturday, February 20, 2021 9:25 AM To: [email protected] Subject: Re: [bpq32] BPQ32 beacon

Hi Ray, I just set it up to go in 10 minutes based on your suggestion. I will let you know the results in 10 minutes or so. ? Thanks, --Brian WD(HXC Sent from Mail for Windows 10 Sent: Saturday,

In my bpq32 windows version Go to bpq32 console, click windows, click beacon configuration Ray N3HYM