开云体育

Make sure you have the latest beta. There was a recent version that rejected statements after the RIGCONTROL section. If you are sure you have the latest try moving RIGCONTROL to the end of the port

JohnMy SCS modem is connected to ACC USB D!and to use the sound card in the radio it has to be USB D2 don't know if this will help.Thank you for all your hard workRich NS;7K

I just checked my forward settings to K5DAT as well, and they were still set at non-binary. I'm still searching thru my 210214_BBS.txt and find no instance of any BBS remotely changing my SID

Here my config for 40m (worked fine for long time): PORT ID=PACTOR_40m DRIVER=SCSPACTOR INTERLOCK=1 COMPORT=8 SPEED=57600 PORTCALL=HB9AK CONFIG???????????????? ; Driver-Specific

Update - after I sent that last email I looked through forwarding settings and found that KE0GB, N9PMO, N3MLB and KD5LPB were also set to B2 for binary. I changed them all to B1 except Rick's which I

Logs attached. I removed all binary from the forwarding settings for VE3CGR yesterday evening - not sure exactly what time. This morning it was back to allow binary checked and B2 checked. So given

That should work. Where did you put it? - it should be in the Dragon port config after the CONFIG statement. 73, John

John, Just noticed the following statements in the Console: Source record not recognised - Ignored: DRAGON SINGLE What can I do? Martin HB9AUR

I can't reproduce this. Do you have a BBS log showing what has happened between it sending the plain text SID and sending the B2 SID? Thanks, John

The code does not have support for the IC7610. With the IC7600 the rig is left in Data 1 when using sound card modes, but the input source is switched from ACC to USB when transmitting. Would the same

It isn't supposed to do that. I'll look into it. Thanks, John

I'm already on .24 and it still does it, Lee. I have a partner that I forward to and I set in non-Binary, but forwarding to his BBS, the Binary is somehow "remotely" switched on with B2. Strange,

Thanks, Lee. I knew there was a script out there somewhere, but never messed with it. 73 - Rick KE0GB

I have seen this as well - but so far with only one forwarding partner. He changed his side to B1 yesterday, and I changed mine back yet again to B1 at around the same time. However this morning I

Any help with BPQ32 I am running a IC7610 and SCS modem and trying to use VARAHF everything works great until I try and connect to the VARA part.? I am running the SCS modem on D1 and VARA on D2 it

One further comment.? The Statement:? "Several days passed...addressed it :( " ...was meant to be included as part of the original commented text, and not from me. My comments start with:?

This was taken directly from my BBS earlier today.? I've noticed the same thing happening to my system over the past few weeks but haven't determined which version it started with, but it did occur

(after shutting down BPQ) From the directory where your pilinbpq executable is located: mv pilinbpq pilinbpq.bak wget https://www.cantab.net/users/john.wiseman/Downloads/Beta/pilinbpq chmod +x

Rick: Go to John's download page: http://www.cantab.net/users/john.wiseman/Downloads/ Click on Beta/ Drop all the way down the list to find:? pilinbpq The date on the right side should show

Hi John, If you or anyone is available, I need to upgrade my version of Linbpq running on a pi3,and I'm sure it's posted somewhere but haven't found it yet. Anyone have the latest upgrade command line