开云体育

The message must fit in a single packet, so 256. I'm very surprised restarting doesn't change what is sent. Can you send an example of the old data being sent? 73, John

Many of the legacy Yaesu mobiles with the circular data port on the rear such as the FT-8900R; the Kenwood TM-D700 and 710's have 9600 capability and can be put in KISS mode since they have tnc's?

Can anyone advise, which are the radios and tnc's to use for 9600baud on a Linux setup please. Thank from Alan - G0WDA

Interesting,? the main problem here, is you need to reboot your computer which clears memory cache, and allows ID and BT text to be re read. Next step, put a full range of chars in, and see if they

Thank you for for the reply. Will check it out. XROUTER now has a BBS too, but BPQ32 is still my favorite. :-)73 de Chris ww2bsa

The documentation is good, and the setup is logical. If you ever need help I am happy to do help. No, I gave up on 32 bit after getting DOSFBB with Dos BPQ. It works very well. Super stable and

Hi Chris, did you ever come across a 32 bit windows version of FBB? I found LinFBB but I'm not a Linux guy. In any case? I'm jealous of you: I find configuring FBB highly complex and admire anybody

Now that I have DOSFBB running nicely with Dos BPQ4.09, I have moved on to Atari TOS :D I have been playing with DPBOX for a couple of years now, and I thought I would give digipoint (t's predecessor

Hi, It's been a while since I revisited this, but has there been any status updates on freedv and bpq? Last I visited this the freedv dev said they were working with G8BPQ to get the API and BPQ

Some drivers need a longer wait, So i would try to place a PAUSE 30 or PAUSE 60 after the ELSE. I notice that its not consistent on drivers, so drivers like VARA dont need those, but if you use

Hi all, I have been experimenting with a newly-added KAM port (#6). It looks to me that after an outgoing call was tried in G-tor mode (either from QtTermTCP or from within a forwarding script) the

Hi Everyone Can someone please advise, running linbpq on Ubuntu 24.2 What is the max chars used for IDMSG and BTMSG, and is the any chars I must not use and last, when I update any of these message

Hi Glenn, Can you copy/paste your radio port config that you changed?? I'd like to do the same to mine.? I have a feeling my SESSIONTIMELIMIT isn't working, since I'm using the old rig-control

FIXED: Confirmed it is working fine now!

Thank you everyone! Made the change John BPQ starts with no errors.

Hi Rich, At one time I had 3 interlocked ports with no rig control in place at all. It was because I was on one band on one dial frequency 7x24. When I added rig control, I understood at the time

Hi Lee, It was curious to learn that your use of the new / current method worked for you WITHOUT a "RADIO n" reference in a port config section. I assume it was required. With John's clarification

Thank-you very much. That sounds familiar, and sure enough, it has been stated previously in this group. I should have done a search for it. 73, Lee [email protected]> wrote:

RADIO and INTERLOCK do the same thing. With the new method of defining rigcontrol it seemed sensible to use RADIO to link the radio definition with the ports but INTERLOCK still works for

I thought the whole point of INTERLOCK was that you want them to lock each other out, i.e. as soon as one port is in use with its specific modem or TNC, other ports that share the same radio are