开云体育

Or move them up so that they are above the RIGCONTROL statement. Either way they have to be outside of the rig control section. 73, Lee K5DAT [email protected]> wrote:

Move both Session... and BW to after the ****

Looking for assistance with this command in my VARA HF port. I am finding the need to put a limit on this port, to counter the RMS users that think they should use VARA HF to download a week or two

Anyone running Clover on there bpq32 ?

Hello! Debian Security team are tracking it: https://lists.debian.org/debian-security-announce/2025/msg00061.html It has been fixed in Bookworm (12), Trixie (Testing/13) and Sid (Unstable) but **not

Thank you John.... then I will not try :) All the best and thank you from Alan G0WDA - Blackpool

In my view, no. 73, John

Hi John, Thank you for the information I have learnt a lot from you... Question: is there any value in interfacing my bpq1 to the 44 network please if yes? do you have a section I can look at

In the messages that I see the majority are using BPQ. If you look in the R: lines at the top of each message you should be able to see what software is being used by the station forwarding the

Hi John, Yes there is 693 messages so far :) Thank you.... It appears people are using FBB what is the reason for this, does it give the user a better experience ??? All the best from Alan

That seems to be working. Can't you see the messages on your BBS? LIS gives monitor output. The resolution of the image is too low to be able to sure but it seems to be showing similar info to the

Did you set it to monitor port 3 in the Monitor Menu? What does AXR 3 show? Have you seen https://www.cantab.net/users/john.wiseman/Documents/QtTermTCP.html 73, John

Hi John, This is from the bbs_logs

Hi John, I did a lis 3 in Qttermtcp and got this...

Good Morning John, Map commas removed spaces added, QTtermTCP installed, and running, set the forward running to gb7cip but nothing showed up on TTermTCP

Hi Alan, The fields of the MAP should be? separated by spaces not commas. If you haven't done it yet I suggest you install QtTermTCP. This is the easiest way to monitor what is being sent and to

Good Morning John, Sorry dont understand what you have said, but here is the port three AXIP config thank you for your help... PORT PORTNUM=3 ID=AXIP

Hi John, Just got up, Right I have a feeling the logging is not right, there is no detailed logs but I think that is my fault, please advise John, and I am running Linux Ubuntu 24.2 I will get screen

Sorry, pressed send too soon. There are lots of things that could be wrong. You said you had a MAP entry. Does GB7CIP have one for you? You can use the AXR command to check if the MAP entry is