开云体育

For clarification the bulletins I am referring to are addressed like the following: @ARL @ARRL @AMSAT @LUNET ...and many others. This is just a note to help sysops new to BPQ understand how forwarding

You can also add a LOCALNET=xxxx command to your Telnet port and avoid the user/pass prompts from any computer on the local net. -- 73, Mark, N5MDT Montgomery, Texas

I created a PY1XTA-10 email in Winlink and the error message apparently stopped. Em sex., 27 de dez. de 2024, 06:41, Mauro Veiga via groups.io <maurorveiga= [email protected]> escreveu:

Em sex., 27 de dez. de 2024, 04:54, John G8BPQ via groups.io <john.wiseman= [email protected]> escreveu: No. My Winlink address is py1xta@.... PY1XTA-10 is my CMSCALL. What happens if you

Are you saying that your winlink address is py1xta-10@...? What happens if you remove the -10 from CMSCALL? As you have found, your system is working, but it isn't recording any traffic stats

Thanks Billy.... I just discovered from an older post that I could log into the bpq config pages without a password by going to: 127.0.01:8008 (telnetting in I guess). I then added myself back in as a

Good day, I have 2 Chatnodes I am trying to connect and keep getting *RTL, what that mean? -- 73 de Jean, VA2OM / VE2PKT

Log in as the SysOp via a login configured under your telnet/http port within the bpq32.cfg file from the SysOP login link: http://IP:PORT/Node/Signon.html Under your Telnet port:

On my pi 3b.... I accidentally deleted my call on the 'users' page and that seems to have locked me out completely -- all I get is 'user name or password not valid'. I've tried getting past the login

The -10 in aprs.fi was a test done months ago. When I made the RMS Gateway I no longer used ssid -10 in APRS, only in Winlink CMS. Em qui., 26 de dez. de 2024, 19:01, Mark Taylor via groups.io

I can't remove the -10 because it's my Sysop callsign in Winlink. I thought about adding the -10 as Auxiliary Callsign. Em qui., 26 de dez. de 2024, 18:45, John G8BPQ via groups.io <john.wiseman=

I was confused that the error you show in the image is after the APRS config information. I'm curious it the error disappears after you make changes. The other thing that confuses me is that it

You could create a Winlink account for PY1XTA-10 or take the -10 off CMSCALL. 73, John

Ok. My Winlink account is PY1XTA and my CMSCALL is PY1XTA-10. This is my application line: APPLICATION 3,RMS,C 5 CMS,PY1XTA-10,XTARMS,255 All Winlink connections works fine. Really don't understand

The CMSCALL should probably not have a SSID.? It normally is your base call but depends on how you registered at winlink.org.? When you log into your account at winlink.org do you use just your call

"Do I need to add PY1XTA-10 as Auxiliary Callsign in Winlink Express?" Hi, Mauro: I have no clue. I do not use Winlink Express?. I do not use Windows?. All: Will anyone else answer Mauro's question?

Hello Chuck. It made no difference. Do I need to add PY1XTA-10 as Auxiliary Callsign in Winlink Express? Em qui., 26 de dez. de 2024, 16:09, Chuck Gelm via groups.io <nc8q-aredn= [email protected]>

PORT ?PORTNUM=3 ?ID=AREDN 5665 MHz ?DRIVER=Telnet ?QUALITY=192 ?MINQUAL=141 ?CONFIG ?? LOGGING=1 ?? CMS=1 ?? DisconnectOnClose=0???? ;? 1 = closes window when you bye ??

Hello Mark. This is my Telnet Port configuration: PORT PORTNUM=5 ID=Telnet Server (no inbound) DRIVER=TELNET CONFIG LOGGING=1 TCPPORT=8010 FBBPORT=8011 HTTPPORT=8080 USER=PY1XTA,202427,PY1XTA,,SYSOP

That there may be a clue.? Your APPLICATION should say connect to PY1XTA-10 but in your Telnet port CMSCALL config should only use PY1XTA. Is that it? Or, you have a configuration where you are