开云体育

I obviously do not know anything of your application, but it seems to me to be an incomplete application line.? Would it be prudent to try adding a call, alias, etc to fill out the line properly??

Hello all, I am having some trouble getting my linbpq node to act right. I have a web browser application on it that I am trying to get working. It works fine over telnet, but when I use my second

Seems like folks have already beat to death the modem vs soundcard nuance etc.? So just another data point for you - On the base station, using a pair of SL-USBs for VARA-FM and VARA / ARDOP, and a

It's working today! Sorry for the false alarm.... TNX es 73 Jim KI0BK

For a different perspective on things ... I run BPQ into the Direwolf software modem driving a Masters Communications sound board into various radios. What is nice about this approach is that it is

Ping may work but TCP connections not, as windows firewall usually gives access to a program, not an address. But the device window suggests bpq is connected to the modem. Have you tried attaching the

Thanks Mark, I will do that, makes a lot of sense... Seems this was a miss config on my part, or at least a miss understanding how routing works. 73 Jim

Jim, my recommendation is to remove the MSGTYPES line completely, or change it to PBR if you feel compelled to use it. That will ensure a type T is not sent to me even though with proper addressing a

Yes 192.168.0.117 is the IP of the PC, running UZ7HO soundmodem.exe 192.168.0.110 is the IP of the Rpi running BPQ, config for port 5 UZ7HO 300b fx/ax.25 Windows firewall says its not blocking

Yes I had WW and USA set in the flood box, No on the request reverse. As seen in the other reply, I have removed all items from flood box. The interval was set to a short time interval, 1 min or less,

At the time the log was running, I had USA and WW in the flood box

Works! My error was to use 127.0.0.1 instead 0.0.0.0. Thanks, Lee. :-) Em seg., 18 de nov. de 2024, 01:06, Lee Bengston via groups.io <kilo5dat= [email protected]> escreveu:

This suggests you have WW in the Bull HR field for N5MDT. Are you sure you don't have? Also what is your forwarding interval for him, and do you have request reverse set? 241114 04:37:59 ?N9SEO-1 ?

I tried it just now, and it's working. It needs to be a SimplyKISS port in APRSIS32 Mine is set up like this: [image: image.png] APRSIS32 is on a Windows 10 machine on the network, and 192.168.200.8

Hello Lee. Sorry for revival old post. I tried this config to make a bridge to APRSIS32 client but don't work. No communication. I created a simply kiss port on Aprsis32 with same address and port.

Jim, can you post an image of my forwarding record?? If it will not let you here just send it to my email. Mark

All: I have not used MSGTYPES yet, but if I chose to someday,... Is it correct that no MSGTYPES in a script and MSGTYPES PTRB are equal? 73, Chuck

Bulletin came in from N9SEO, and was sent successfully to all but N5MDT because I set him to PTR, Once I set his to PTRB the message was sent, what was unexpected was the repeated attempts to send the

Can you post the routing trace from the BBS log for when the bull arrived, so I can see why it got routed to that BBS? Thanks, John

Assuming 192.168.1.117 is the IP address of the Windows machine and Soundmodem AGW interface is configured for port 8200 and enabled then the most likely problem is the Windows firewall blocking the