开云体育

Let me know if you cannot find it as well as which version.. I recommend ThjeNET 2,08b I believe is what I always use.. Ill dig out that version and have it on hand.. May have to fire up my old WiNXP

I would like to thank for the replies. I am looking to use an old MFJ-1270B. I will look to see if I can find the THENET code somewhere. I will being burning the rom myself. Again, Thanks all for the

Hi All Done something stupid and now cannot start PiLinBPQ, keep getting error code 2. Reading it a little more carefully I see that BPQ is in directory "home/gb7sou/Ham/pilinbpq" but BPQ is looking

Very helpful information guys thanks for the review. We are still running standalone Bpq in Gainesville, Florida. Gordon kx4z

NET/ROM and TheNET were very similar. Both run in an EPROM in a Z80 TNC-2 made by TAPR or licensed from TAPR. Companies that made these include AEA, PacComm, MFJ, DRSI, maybe others. The EPROM was a

It depends on what you are asking for. Do you want to set up a TNC to run a node? If THIS is what you want, you need to know that "NETROM" was software loaded into a ROM that could be plugged into a

If you are referring to netrom in Linux, the info available via this link might be helpful. https://www.elite.uk.com/mike/posts/linux-netrom-setup/ 73, Lee K5DAT [email protected]> wrote:

The original NETROM was an eprom for the TNC2 that was sold by Software 2000 ( if I remember correctly). As far as I know it is no longer available. TheNet was an (allegedly illegal) copy. Not sure if

NetRom is a routing protocol that is part of all the different bbs software packages. -- Charles J. Hargrove - N2NOV NYC-ARECS/RACES Citywide Radio Officer/Skywarn Coord. NYC-ARECS/RACES Nets

Hi all, Anyone might now where I might locate Node software called Netrom?? Angelo

That makes sense. I’ll keep checking. It probably isn’t setup for frequent refreshing/syncing considering these server stations are typically not moving around. Thanks, LCM

I don't think so.? It will just take a while for the change to be reflected on APRS.? I don't know what their update timers are.

Thanks, Mark. I found the old grid square in the WL2KREPORT section of the bpq32.cfg file. I changed it to our new gridsqare but the node is still showing up with updated time stamps on aprs.fi with

Winlink gets the position from your WL2KREPORT configuration line in your bpq32.cfg file, or from your RMS Packet program (if that's what you use.) You don't need to do anything for APRS.? It will

http://vps1.g8bpq.net/

All: Is there an issue with the online BPQ Network Map? The site loads but there are no stations. Tony -K2MO

We are moving our club BPQ packet station to a new site. I tried updating the LOCATOR to the new grid square and I changed the BTEXT to the new lat/long but I can't seem to get the location to update

Thank you! LCM

Yes, there is also a port specific beacon, set in the ports section of the web management interface and stored in UIUtil.cfg 73, John

We are moving our club LinBPQ node from one site to another. As such I need to change the Beacon text to correctly show the new site. I have tried editing the ~/linbpq/bpq32.cfg file and restarting