开云体育

Hi Heber, Are you using a CM108-based DRA-30 or other DRA dongle?? Or is it a basic CM108 dongle modified to use its onboard pin for PTT?? If it hasn't been modded to use the onboard pin, then try

Hello Heber, I had VARA working at one time with a CM108 sound dongle. I used PTT CM108 in BPQ (see below). Also in the PTT settings in VARA HF I selected "RA Board". I believe "RA Board" refers to

From the document at https://www.cantab.net/users/john.wiseman/Documents/VARA.html *The first line defines the IP address and Port of the VARA TNC, an optional PTT parameter, and an optional PATH to

I have a Kenwood TS-480.? I purchased the CAT control cable and the PC see it as COM3.? I am using a USB dongle CM108 for the sound, I do received sound fine. This is my config pretty sure is

Gary, You can also run a digi from BPQ by adding these two lines to your radio port. The digi uses the same SSID as the node. DIGIFLAG=1 DIGIPORT=0 The details are about halfway down this

Open your UZ7HO (soundmodem config) then go to the (MyDigiCall=) put your callsign with SSID. 73 de Lot / DW1IRF

I have BPQ32 running as a VHF packet node and all is working well. I am looking for suggestions as to whether I can also run it as an old fashioned digipeater (non-APRS). The digipeater would be on

Thank you I do not need the messages just my config and forwarding config Thanks de Mike N8FWD

linux and Windows diffeer... Windows, there is a bpqmail.cfg and chatconfig.cfg files that contains the configuration. I never bother with the messages, but if you really want to keep them someone

Hello, I am going to move my BBS to a new Computer. I reinstalled the BPQ program then copied my old bpqcfg file to the new computer. The node works fine. My question is a multi part question. What

You can't use just a country or continent code and expect it route on the AT list, as they are expanded to a full HA (eg EURO > EURO.WW, GBR > GBR.EU.WW) so will only route on HA fields. So if want to

Understood. Tnx Charles.Chris ww2bsa

Bulletin flood area vs hierarchical address continent code. The flood area can be any 6-character word, but the trick is in having the forwarding partners pay attention to it. Just because it says @eu

Thank you for the reply, John. And since I haven't said it in a while, "Thank you!" for a great piece of software! It has brought back a lot of memories from my dial-up BBS days

With BPQ either. BPQ recognises both 2 and 4 character continent codes. I don't know about other BBS systems. 73, John

I've read some of the old posts on here, but wanted to confirm the proper format if I wanted to send a bulletin only to Europe. SB ALL@EU or should I use EURO Thank you. 73 de Chris ww2bsa

Just fyi in case someone else runs in to this issue. I added "DisconnectOnClose=1" to my Telnet server Port config section in bpq32.cfg and the issue of stuck sessions seems to have gone

I'm looking to expand my horizons in 2024. I'd like to entertain additional AXIP/AXUDP links and BBS forwarding with stations outside of North America. I have plenty of both in N.A. Ideally, I'd like

Hi folks. I can access the Node/BBS with the VARA Terminal and navigate in the same way as with Packet Easyterm. But I couldn't do the same with ARDOP Chat. Is there any other mode besides PACKET and

As others have said, a semaphore clash occurs when two threads in the program try to access a shared resource. The total is of no real signifcance, but will be higher on a busy system or one of