开云体育

Hello Jeff If your platform is windows there should be no issue sharing a single sound device and a little more detail on your specifics may be required. If it is linux then a custom .asoundrc file is

Master Communication has a audio splitter that shares audio between radio, signallink, and direwolf Herbert KD5PQJ

I am stumped with trying to get both a Direwolf and VARA FM configuration to work.? I can get each to run individually but when I try to have them both work at the same time I can't figure out how to

So I've written a simple script to output the last x number of lines of the APRS log.? If I set the number of lines to 1 or 2 it works. I get "*** Connected to APRS" and the lines are shown.? But if

Using QtSoundModem 0.0.0.64 source compiled for x86_64 I see the following for a 40m port: 1:Fm KT4WO-1 To KB9PVH-6 <RR C? P R0>[15:50:43R][--+--][AX25 0] 1:Fm KT4WO-1 To KB9PVH-6 <RR C? P

Hi Mark, I figured it out. I hadn't beaconed to APRS-IS (I'm not ready to advertised my node just yet, still have a few tweaks to make) so APRS-IS could not understand my filter of m/200.? It has to

I can't give you anything definitive but I can offer a couple of things to try... First thing I noticed is that your APRS call is the same as your node call.? I've never done that and don't know if

Thank you, sir. -73 de Chris KQ6UP -- Thanks, Chris Maness

I want to receive from APRS-IS (but no IS to RF) and gate any RF to IS.? With the config below I am connected to APRS-IS but don't seem to be getting anything from it.? Passwords below are fake of

Hi Chris For Raspberry Pi OS: apt install git build-essential libconfig-dev libssl-dev libminiupnpc-dev libzip-dev libpcap-dev libasound2-dev minicom unzip I suspect this will get you 90-100% of the

I have done this before so that I don't have to add 32 bit support in Xubuntu, but I don't remember what dependencies were missing in a fairly typical Ubuntu installation. I remember it was about 3 or

I know if I connect from my node to another using S then when I "bye" from that second node I am returned to the first.? But I can't seem to get this working for applications.? In my bpq32.cfg I

Hmm, that's an interesting thought.? I keep wanting to blame individual Pi's but the ones that keep eating SD cards for lunch (and breakfast and dinner!) are also the ones on a multi-way USB power

AXIP over Starlink should work fine but it uses CGNAT which means you won't be able to use traditional port forwarding. That said If one side of the link has a public IP or can port forward and you

Will do, our field testing is Thursday and top of the list is to get BPQ connected and hopedfully connected to a few other nodes over AXIP We are using ZeroTier already in this setup and I can also

Hi Scott - just recently got notice that we could get on their "best effort" service until they're 100% happy with the coverage that we could move to "residential" service.? Trying to work out if we

What's your time frame ? This week I am adding a Starlink and we hope to test with a BPQ node behind with no VPN and see what the issues are. We might have the same issues you will encounter and we

Right now I'm on fixed wireless through Frontier Communications.? I'm using noip.com DDNS service for the node address.? Currently I have no problem with port forwarding through their router or the

Charlie, I have it running over Starlink, currently using VPN (ZeroTier) but plan to change it up slightly. SL uses CGNAT and I need to make a couple of portable BPQ nodes that will have Starlink and

The subject says it all... looking to see if anyone has already got this working... TIA. -- Charlie (N4NVD)