开云体育

Success! Using the params provided by Jay WS7I, I have blinking lights on the TNC now, time to connect the radio! Thanks every one who helped. TNX es 73 Jim KI0BK

yes, the DCD light and the PTT light … and more. sparks

IOADDR made no difference, my guess is it is something for windows....

This may be a dumb question, but do the panel LEDs on the TNC still blink when in KISS mode, ie. I'm expecting the xmit/rev Con/Sta LED's to light up when a connection is made, packet is sent/recved

not sure what the IOADDR=8 does, but will try adding that and see if it works. Thanks for the config! Jim

I've looked through the docs to see if the flags shown after call-signs in the heard list are defined anywhere but I'm drawing a black. Can anyone remind me of what the + and . mean in this example?

Yes I did. Thanks JIm

Hi Ken, I removed the TNC Port section and set channel to A, but still no go, but at least the errors went away...??? So making some progress. Been doing packet for many years, have always set my

Guy, I am available on 14.105 most days from sunrise until the band goes out.? You can access my mailbox at K0WL-1,and could also use my Ka-Node K0WL-7 for linking to other stations.? I am located

Here is a working KPC 9612 Port not sure Linbpq makes any difference PORT ? ID=VHF ? TYPE=ASYNC ? PROTOCOL=KISS ? IOADDR=8 ? QUALITY=192 ? MINQUAL=60 ? SPEED=9600 ? CHANNEL=A ? MAXFRAME=2 ?

Jim, Did you set the TNC into KISS mode? BPQ-32 does all the processing work. sparks www.midgadata.lumasis.net <http://www.midgadata.lumasis.net/>

I have a 9612+, and Ken's advice sounds good. When using the 1200b port, settings for software such as BPQ are usually the same that would apply to a KPC3+. Channel=A should work fine. Also 9600 is

Hi Jim, Remove the TNC Port section, and make sure you don’t just need an A or B for CHANNEL. I know KAMs only need A or B, but not familiar with the 9612. If you had the speed at 4800 when you put

a newbie here looking for help getting my first packet station running, I'm use linbpq on a rbpi3+, trying to get it to talk to my Kantronics KPC9612+ TNC but not having any luck. I have a USB/RS232

I guess that's progress! Thanks John

* can't

John, I can get this version to crash either. Sholto

There is something odd going on here. I can't get it to fail myself, but another station was having the same problem. He tried running a debug version for me, but it didn't crash. So can you try that

Same here. HF or AXUDP? 73, Todd N7TRY

Hello.?What mode?Hf or axudp? ..73 jerry n9lyaSent from my Galaxy