开云体育

When stations arw calling me , my pactor scs 7800 dragon will not answer, pactor is plugged in rear port of ic 7300 Running latest windows , bpq32 . Running vara , ardop and pactor with ic 7300 Below

Returned to Node COSCO:KE0GB-7 :>c 4 !kb9soz-1 s COSCO:KE0GB-7} Sorry - System Tables Full An rf link attempt just sent me this back rick .. 73..?? --steve,kb9pvh--

Niels: Thanks for the info!? Truly appreciated. 73 - Rick KE0GB

I've done some testing and it's on the MAXCIRCUITS = 128; Max L4 circuits if I lower this I get the message LAPNOD:PI1LAP} Sorry - System Tables Full. Connected to TelnetServer c 3 pi1bdg

Hey John, Yes... I will check that also. Can't get back up there until? next Tuesday, so wanted to cover all my bases. Did you see any issues with the file? It worked great here at house, had it

Looks ok to me. Could it be rf interference on a mountain top site? 73 John

Thanks John.... I had already noticed that it had no effect. Look like a path error. But thank you. 73 Niels PD9Q Op Thu, 11 Feb 2021 14:59:29 +0000 "John G8BPQ" <john.wiseman@...> schreef:

Also---- I made a few changes to the config file after last test and before moving to the Mtn. I replaced KT4WO-9/8/7 with KF4DTL-9/8/7(the club call) and I made the RF port "port 1" and telnet "port

If you have a lot (~60) of Netrom neighbours you may hit the MAXLINKS limit. The L command lists your active links. Circuits are displayed using the U command. A linked pair takes two entries and

I just put a new node on a local mtn top and I can hear the beacon great but its not responding to any calls. RPi with NinoTNC and a Motorola 1225 If ya'll could look over my config file and see if I

Yes, that's a bug. The error message shouldn't be displayed, but otherwise it isn't doing any harm. I'll fix it in the next build. Thanks, John

Sorry running Version 6.0.21.23 "Niels Ruiter" <pd9q@...> wrote:

Hi, I found some error in the syslog, someone have a clue Feb 11 14:47:39 pancake LINBPQ[583]: Q_REM 0x5f3b38 GUARD ZONE CORRUPT 5e Called from /mnt/Source/bpq32/CommonSource/IPCode.c Line 3090#015

John: No, MAXLINKS and MAXCIRCUITS have always been the same from day one, MAXLINKS=63 and MAXCIRCUITS=128.? In your example of a SIMPLE node configuration, you use the same values except

The Disconnect button in QtTermTCP disconnects the TCP session which will disconnect the node session. Most applications have a disconnect command (the Node BBS and CMS is? B, Chat /B). 73, John

John, Lee: http://www.cantab.net/users/john.wiseman/Downloads/Beta/QtTermTCP64_V43 Works great on LinuxMint 20.1 Thank you, Roger, N1XP

This is a beginner question, but how do you disconnect from someone within QtTermTCP? I can disconnect from a -7 node by sending a 'b', but what about when it's just a call, without a SSID? EasyTerm

Thanks Mike, Just placed the DLL in it's spot & the Mail file, and let it start up, and it started working. Jon KK4ZIZ

System Tables full is caused by MAXLINKS or MAXCIRCUITS limits being reached. Have you changed either recently? 73 John

Just realized that RPR connects do not work properly anymore (at least at RMS HB9AK - SCS DRAGON is used for RPR): When connecting, BPQ32 replies correctly, but the port monitor (PACTOR) still says