开云体育

pilinbpq *2025-03-13 11:37* ??? 5.2M Ah, ha! A new version just 3 days ago. Upgrading... Thanks. 73, Chuck

I am pretty sure you are fully knowledgeable of the @ portion of the address.? I think you are questioning HAMGATEME. There are a group of hams that are RF only operating in a closed network.? They

That won't work with virtually all BBS software which limit calls to 6 chars. It also shouldn't happen with BPQ unless you have an old version. 73, John

HAMGATEME.N2NOV.#RICH.NY.USA.NOAM Hi, Jan: Sorry, I was not more specific. It is the HAMGATEME part that baffles me. I was wondering?if BPQ32 parses hierarchical addresses > 6 characters ? I was

Oops, a typo i read after posting.. :-( It is not shouldn't it is should..? sri for that. To compensate.. https://themodernham.com/packet-radio-mail-forwarding-and-routing-for-bpq/ Be sure to have

Hello Chuck, Totally not or a piece of it? The hierarchical addresses are used to route mail or bulletins. They break up in two pieces for processing, before and after the @? There are in HAM radio

Hello group, Is there a way to make a beacon broadcast possible in FEC for advertising a PACTOR connect in BPQ? Something thought me to first search for a similar topic but couldn't find one. ;-) Best

HAMGATEME.N2NOV.#RICH.NY.USA.NOAM Packet BBS hierarchical address > 6 characters 73, Chuck

Could you send me a copy of the form so I can try it here to see what is going wrong? Thanks, John

After setting up a new bbs partner, i tried the start forward from the drop down in the Actions tab, but nothing happened. Is this a known issue Add new user has been setup an flagged as bbs,

Hi dear john I've tried using custom templates but I've found a few problems : the first : I load an image into my template with the following code The text is converted into a url that seems correct

Yes, that does assume knowledge of Qt development. I started with a new install? of Linux Mint 22 and had to run sudo apt install git libqt5serialport5-dev qtmultimedia5-dev ?git clone

Hello Kevin, I found John's instructions at https://www.cantab.net/users/john.wiseman/Documents/QtTermTCP.html to be quite useful. Regardless if you are unfamiliar with linux and manual compiles it is

Hi Linux Wizards Trying to install QtTerm on Ubuntu 24.04 come up against a brick wall Not the greatest of instructions see below If you need to run on other Linux or similar systems you may be able

It should now discard any record with an address longer than 6. This was recently fixed (in version 6.0.24.56). 73, John

On 250313 HAMGATEME/I @ HAMGATEME.N2NOV.#RICH.NY.USA.NOAM zip ? ME ? 73, Chuck

There is noting in the log. Of the 5-6 stations 2 of them start around 1100, the rest nothing. Even the Vara log shows nothing from 0300 until 1100 except for one incoming connection that was

There are a couple of messages saying "KISS client application 0 has gone away." This suggests that BPQ may be closing. Is there anything on the console or debug log to indicate BPQ is restarting? 73,

Yes, interval timers start when the BBS starts and run at the same interval even if incoming connects are made. So if you start at 0615 and have 3600 seconds it should try at? 0715, 0815 etc. It

We are running in KISS mode.? Here is a debug from Direwolf: direwolf -d n Ready to accept KISS TCP client application 1 on port 8001 ... <<< Data frame from KISS client application, port 0, total