开云体育

I don't know if the linux versions use it, but also look for a BBS=1 configuration, and set it to BBS=0.? I don't remember is SIMPLE sets this or not but would imagine setting BBS=0 would take care

Remove the BBS and Chat application lines and the LINMAIL and LINCHAT lines from bpq32.cfg. You could remove the bbs and chat config files, but I'd just leave them in case I decided to use them in the

Effective immediately, the BBS and node LU9DCE will exclusively use IPv6. Please connect using the following address: *lu9dce.dynu.com* *Port 10093* Thank you for your understanding and cooperation.

Something must be going wrong here, If you remove a AXIP MAP record (and so long as you don't have AUTOADDMAP set) you will not be able to send or receive NETROM packets to/from that station over that

Good Evening Mark, Good to hear from you on here! I did try completely purging all records (User, NetRom, etc.) which I forgot to mention in the post. They kept repopulating though especially the

Thanks for the sysop command!

I’ll try that, thanks

Greg, I think there may be more to removing a forwarding partner than simply removing his MAP entry. You probably should remove his Forwarding? and User records as well. And, removing him from your

Hi, Jim: Did you try: Log on to the BBS as a SYSOP user and enter reroutemsgs 73, Chuck

Perhaps it is this, Since the forward P to many was added I noticed that the PN indicator does not change, tho it does in fact forward to many as is witnessed in the logs. Not sure if there is

If it is showing as queued on the forwarding record simply click on Start Forwarding. If you changed the parameters so that it should forward to a different partner then go to Mail Mgmt, Messages,

I’m trying to forward a msg type P to a link partner, when it failed, it set status to N (not forwarded) how can I get it to try again after making a change to my forwarding Parameters? on linBPQ

There aren't 64 bit versions of bpq32.dll, BPQMail.exe or BPQChat.exe. It is possible to build LinBPQ for Windows in either 32 or 64 bit versions. 73, John

Hi all, I was snopping around into my partners' nodes and I found this: BEDNOD:GB7BED-5} Version 6.0.24.33 (64 bit) Is there a 64bit version for Windows ? I did some reasearches in the mail archive,

use crontab @reboot /root/bpq/run.sh -------- run.sh #!/bin/bash # cd /root/bpq if pgrep -x "linbpq" > /dev/null then kill $(pgrep -x "linbpq") fi sleep 10 ./linbpq >/dev/null 2>/dev/null &

The other copy of linbpq that is running might have been started as a service. Check /etc/systemd and look for any likely suspects. e.g. bpq.service or linbpq.service etc. Also, run the following

As Todd has has mentioned Alias is limited to 6 char but it also can't include a - character. Bind Error 98 almost always means you have another copy of linbpq running. 73, John G8BPQ

First, nodealias is limited to six (6) characters. Try changing NODEALIAS to NFDNOD and see if that clears the error. This is likely the issue Todd 73, de Todd N7TRY [email protected]> wrote:

I am in the planning stages of adding VARA to an up and running LinBPQ site that is using Direwolf for VHF. Our intention is to use a CAT controlled radio that has yet to be acquired. On my test

Problem Solve. 73 de Jean VA2OM / VE2PKT -