开云体育

I use ?ISHOST=noam.aprs2.net -- Ray Adkins │ American Red Cross Ray V. Adkins N3HYM│ American Red Cross Disaster Service Technology Team Lead National Capital and Greater Chesapeake Region (240)

Appears ok unless there is some specific error of spacing I suppose- https://www.aprs-is.net/APRSServers.aspx

My entire APRS cfg sections began this thread- I adjusted the host recently based on another user here who posted their cfg. Mine was having same issue before I adjusted. Does this look normal? Thx.

Thank you, sir. That's the sort of thing I was hoping to find.

Hi John, Did you have chance to look at this one? Thanks Matthew 2E0SIP

You may have found a new bug. You should be able to get some debugging info by running linbpq under gdb (the linux debugger). See message #37092 for details. If gdb isn't installed on your system you

What host name are you using? Have you checked it for typos? 73, John _____ Sent: 11 May 2023 23:51 To: [email protected] Subject: Re: [bpq32] BPQ APRS igate setup questions #aprs Port forwarded, Pi

Port forwarded, Pi restarted (has static ip, DDNS, and been forwarding 8010, 8011, 8012, and 10093, etc for years), but still getting "APRS Igate connect failed". Forwarding working I am able to get

yes

Interesting info- so I can assume the codes do not expire- thanks. I am still looking for what could be causing "APRS Igate connect failed"

Is there any solution to segmentation fault crashes like installing a fresh pilinbpq or other method? I do not have any method of detecting crashes and restarting BPQ- I just don't have the knowledge

Thanks John!!

Yes, it should say two or more ports. You can interlock as many ports as you need. 73, John _____ From: [email protected] [mailto:[email protected]] On Behalf Of Rick Paynter VA7RBP Sent: 10 May 2023

This is what your node thinks the other node's port Quality is set to. As there is little agreement about what to set port Quality to, and widely differing values between nodes can lead to odd routing

Hi All, I know the documentation states "two" ports, but any chance it can do multiple ie; 3 or 4 soundmodems? Thanks Rick VA7RBP

Also, try to connect to multiple stations unless your radio has lightning fast T/R turnaround. Some radios are fast and the default settings cause problems with slower radios. Sysops don't seem to

Thanks John, will give it another try with those changes. -- Brian K0FBS

What does Rem Quality actually mean?? I am trying to understand why that value can be higher than the set quality.... Should Rem Quality value be considered in locked routes? Thanks, Harmen VE3EMA

APRS-IS passcode is mathematically generated from the callsign - here's an example of the function:?https://github.com/magicbug/PHP-APRS-Passcode/blob/master/aprs_func.php

Brian, You can't have two RIGCONTROL definitions for the same radio. The INTERLOCK=1 tells the code to use the same definition for both ports. There is no need to connect the control port to the PTC -