开云体育

Hi Ken, I removed the TNC Port section and set channel to A, but still no go, but at least the errors went away...??? So making some progress. Been doing packet for many years, have always set my

Guy, I am available on 14.105 most days from sunrise until the band goes out.? You can access my mailbox at K0WL-1,and could also use my Ka-Node K0WL-7 for linking to other stations.? I am located

Here is a working KPC 9612 Port not sure Linbpq makes any difference PORT ? ID=VHF ? TYPE=ASYNC ? PROTOCOL=KISS ? IOADDR=8 ? QUALITY=192 ? MINQUAL=60 ? SPEED=9600 ? CHANNEL=A ? MAXFRAME=2 ?

Jim, Did you set the TNC into KISS mode? BPQ-32 does all the processing work. sparks www.midgadata.lumasis.net <http://www.midgadata.lumasis.net/>

I have a 9612+, and Ken's advice sounds good. When using the 1200b port, settings for software such as BPQ are usually the same that would apply to a KPC3+. Channel=A should work fine. Also 9600 is

Hi Jim, Remove the TNC Port section, and make sure you don’t just need an A or B for CHANNEL. I know KAMs only need A or B, but not familiar with the 9612. If you had the speed at 4800 when you put

a newbie here looking for help getting my first packet station running, I'm use linbpq on a rbpi3+, trying to get it to talk to my Kantronics KPC9612+ TNC but not having any luck. I have a USB/RS232

I guess that's progress! Thanks John

* can't

John, I can get this version to crash either. Sholto

There is something odd going on here. I can't get it to fail myself, but another station was having the same problem. He tried running a debug version for me, but it didn't crash. So can you try that

Same here. HF or AXUDP? 73, Todd N7TRY

Hello.?What mode?Hf or axudp? ..73 jerry n9lyaSent from my Galaxy

sorry forgot to put contact info kd6mtu@...

looking for forwarding partners for both my bbs (KD6MTU) and the WARREA club bbs (KE6CHO) ... Guy kd6mtu

Sholto: I use APPLICATION 32 instead of 3, and don't have any issues.? You might want to give that a try. 73 - Rick

John, It's when someone makes a connection that's handled by this in the bpq config. APPLICATION 3,TALK,att 3 127.0.0.1 8015,K7TMG,,255 A new terminal window appears in QTtermTCP and sometimes it will

Hi, I have this configuration inside the OBJECT PATH argument: OBJECT PATH=APRS,WIDE1-1 PORT=1,IS INTERVAL=20 TEXT=CT1FGS-3*111111z3845.79N/00912.06WPacket BBS CT1FGS-2. Telnet node.ct1fgs.pt:1976

Sholto, Which popup window are you referring to? 73, John

N *BP* already works, as does ??bp*: n *bp* POGO4:G8BPQ-9} Nodes BPQBBS:G8BPQ-3 BPQCHT:GM8BPQ-4 BPQDX:G8BPQ-11 CASLGR:VA7RBP-7 NOTCHT:G8BPQ-4 POGO:GM8BPQ-9 RBPBBS:VA7RBP-2 n ??bp* POGO4:G8BPQ-9} Nodes