开云体育

[email protected]> wrote: Hello Alan, There are two choices. 1) Connect to your node, and issue *S* (S is for stats) or 2) Connect to your BBS and issue *S*. Therefore you will either find it

Are you sure your service is called gb7esc? Do you need sudo? The S command shows node uptime. Make sure it goes back to zero when you try to restart. Hi John, No I never use sudo, i always su -

You need to add UNPROTO=BEACON (or whatever address you want your beacons to go to) in each PORT that you want to send beacons on. systemctl restart gb7esc.service Are you sure your service is

Thank you for the link will investigate, do I need it, NOPE but I have always enjoyed Packet I had a setup using lots of addons for AX25 using Ubuntu 14.04 On a Pentium 4 But the setup got out off

Hi John, Thanks for the reply, I am never sure of anything,? I can only tell you what I did :) You say that? ?BTEXT needs to be directed to a port, what is the command please... All the best

It isn't a very useful thing to do but it shouldn't crash. I'll look into it. 73, John

Are you sure that systemctl restart gb7esc.service worked and restarted BPQ? BTEXT is sent to the UNPROTO call specified in the PORT config, so if you don't have UNPROTO it won't set sent. 73,

Thank you. So now the above sample looks like this: IDLETIME 60 ATTACH 6 RADIO 14.10230 USB #\TRX F 14102.30 #\TRX F 7044 PAUSE 2 #MYLEVEL 1 MSGTYPES PTRB5000 C <call> ELSE PAUSE 30 IDLETIME

Can someone help with confirming or denying that this situation happens to you please. Required: Windows 10.? BPQ Mail.? HTTP access.? Templates installed. Open Browser to BPQ Node Pages Select

Hi Alan,Yes. The 8800 has a data port on the rear. But you have to do some homework by downloading the manual and look at the specs. Cables for some rigs need to wired up differently to take advantage

Thanks Marc-Andre, I have found Joachim on Linkedin and reached out to him there. Not sure how often he checks his linkedin though. I don't check mine often. I will send a postcard to Mark Wahl and

good Morning Simon Thank you for the information, will take a look Thanks from Alan

Good Morning Chris Thank you for the information, do you know if the FT8800 is any good as I have one of those. All the best from Alan

Good Morning John, Here is the Text IDMSG: GB7ESC BPQ BBS in Blackpool ?UK *** And I? replaced it with this IDMSG: GB7ESC BPQ BBS in Blackpool, UK - C GB7ESC-1 *** but after systemctl restart

Hello Chris! DL8HBS is not listed in the official list of German amateur radio callsigns. But that can mean anything. Either that he has returned the license, that he has emigrated from Germany and

Alan, look at these pages, and join the OARC Discord server.. It’s where the we (UK packet sysops) hang out.. Huge amount of resources and assistance

The message must fit in a single packet, so 256. I'm very surprised restarting doesn't change what is sent. Can you send an example of the old data being sent? 73, John

Many of the legacy Yaesu mobiles with the circular data port on the rear such as the FT-8900R; the Kenwood TM-D700 and 710's have 9600 capability and can be put in KISS mode since they have tnc's?

Can anyone advise, which are the radios and tnc's to use for 9600baud on a Linux setup please. Thank from Alan - G0WDA

Interesting,? the main problem here, is you need to reboot your computer which clears memory cache, and allows ID and BT text to be re read. Next step, put a full range of chars in, and see if they