开云体育

How can I change this to show bw500 instead of bw2300? WL2KREPORT PUBLIC, api.winlink.org, 80, KI0BK, ? ?EM28OU, 00-11, 03597500, VARA, 50 tia 73 jim KI0BK

Hi Jim, I have only one user so far... This is on Port 1 VHF and using Kantronics XPC 3 TNC Will post log next? time... All the best from Alan

“if a caller calls the system” Using what mode? ?Can you post your BBS log of the failed attempt please! is this every attempt by every user or just one user?

Hi Everyone, Interesting problem, if a caller calls the system, you hear it trying 10 times then gives up During that time,? if I go into terminal and do MH 1 it comes back with the caller call

Thank you everyone, Now have MH 1 working All the best from Alan & Thank you all

Hi Steve As you may have seen to my reply to? mark, time to get leads done and connect a radio and tnc and call the node myself... all the best from Alan

Hi Mark, I think the only way round this problem, is get the cables down to hook an other tnc to an other radio which I have And prove it my self... all the best from Alan

Ok then, I was way off... Same applies. Use a monitor of some sort to actually see the traffic being decoded.? Once it is decoded then if it does not appear in the MHeard list you may really have

Alan Your nearest node GB7ELE is on 950 Are you sure you've ever decoded any signals? Do you see them in the qttermtcp monitor window? Ssvemh command at the node will save mh for a restart. You can

Thank you Danny That would be most helpfull All the best from Alan

Hi Mark, in the UK we use 144.9375 All the best from Alan

My Call Sign G0WDA - Location Blackpool UK - g0wda.co.uk is there a signature I can add this into please. All the best from Alan

Ok, now I know where you are the only thing close to you is VHF Packet on 145.01 Is that the frequency you are set to for this port? -- 73, Mark, N5MDT Montgomery,

Ok, that's a start. Hearing something means that there are others transmitting on the same frequency you are listening to. ?Make sure you are listening on a common frequency for your area for the

I have heard traffic a few times, i have a spare radio and tnc, but i can get 2 cables for them, and i cant make them I have shaky hands.. > > > All the best from Alan

Has anyone asked if you are receiving VHF traffic and is your device decoding the VHF traffic properly? Have you made VHF connections using BPQ yet? -- 73, Mark, N5MDT Montgomery,

Hi Lee, I only restart bpq when I do a mod too the bpq32.cfg file All the best from Alan

[email protected]> wrote: lose the MH list after a restart. 73, Lee K5DAT

OK, Alan. Running out of ideas. If you like you could send me your config and I'll try running it here. 73, John

Hi John, No the picture shows port 11 working and being listed Port 1 shows nothing Port 1 VHF Port Port 11 AXIP Port 12 Telnet That is all I have... All the best from Alan