开云体育

Log in as the SysOp via a login configured under your telnet/http port within the bpq32.cfg file from the SysOP login link: http://IP:PORT/Node/Signon.html Under your Telnet port:

On my pi 3b.... I accidentally deleted my call on the 'users' page and that seems to have locked me out completely -- all I get is 'user name or password not valid'. I've tried getting past the login

The -10 in aprs.fi was a test done months ago. When I made the RMS Gateway I no longer used ssid -10 in APRS, only in Winlink CMS. Em qui., 26 de dez. de 2024, 19:01, Mark Taylor via groups.io

I can't remove the -10 because it's my Sysop callsign in Winlink. I thought about adding the -10 as Auxiliary Callsign. Em qui., 26 de dez. de 2024, 18:45, John G8BPQ via groups.io <john.wiseman=

I was confused that the error you show in the image is after the APRS config information. I'm curious it the error disappears after you make changes. The other thing that confuses me is that it

You could create a Winlink account for PY1XTA-10 or take the -10 off CMSCALL. 73, John

Ok. My Winlink account is PY1XTA and my CMSCALL is PY1XTA-10. This is my application line: APPLICATION 3,RMS,C 5 CMS,PY1XTA-10,XTARMS,255 All Winlink connections works fine. Really don't understand

The CMSCALL should probably not have a SSID.? It normally is your base call but depends on how you registered at winlink.org.? When you log into your account at winlink.org do you use just your call

"Do I need to add PY1XTA-10 as Auxiliary Callsign in Winlink Express?" Hi, Mauro: I have no clue. I do not use Winlink Express?. I do not use Windows?. All: Will anyone else answer Mauro's question?

Hello Chuck. It made no difference. Do I need to add PY1XTA-10 as Auxiliary Callsign in Winlink Express? Em qui., 26 de dez. de 2024, 16:09, Chuck Gelm via groups.io <nc8q-aredn= [email protected]>

PORT ?PORTNUM=3 ?ID=AREDN 5665 MHz ?DRIVER=Telnet ?QUALITY=192 ?MINQUAL=141 ?CONFIG ?? LOGGING=1 ?? CMS=1 ?? DisconnectOnClose=0???? ;? 1 = closes window when you bye ??

Hello Mark. This is my Telnet Port configuration: PORT PORTNUM=5 ID=Telnet Server (no inbound) DRIVER=TELNET CONFIG LOGGING=1 TCPPORT=8010 FBBPORT=8011 HTTPPORT=8080 USER=PY1XTA,202427,PY1XTA,,SYSOP

That there may be a clue.? Your APPLICATION should say connect to PY1XTA-10 but in your Telnet port CMSCALL config should only use PY1XTA. Is that it? Or, you have a configuration where you are

I tried to get it to do anything mostly ARQ mode, using the mercury.exe (windows). I did not have much luck yet. Two things that are concerns for me. 1) It gets crowded around HF packet and it appears

Hi folks. I have a RMS Gateway working perfectly well but this error always appears in BPQ32.DLL. Apparently it doesn't cause any problem but I would like to know how to eliminate this error report.

Looks interesting. Have you had a chance to compile it and try it out? Tim - KF5RLL -----------------------------------------From: "N9SEO via groups.io" To: [email protected] Cc: Sent: Wednesday

ER, i mean to say it is supposed to be compatible with any vara client.....

Hi, Has anyone tried mercury modem yet? It is supposedly a 'vara' compatible client. So curious if it'd work in BPQ the same way VARA does. I looked at this a month or two ago but was not sure if it'd

Wondering if anyone can help with my configuration to get VARA HF and QTSoundmodem to share a sound device.? I tried the John G8BPQ's .asoundrc config and only changed it for my hw:1,0 sound device

I am seeing the same thing here. To connect to KC3SMW I have to use a digipeater. I see a connection response from KC3SMW but I immediately send a DM packet while KC3SMW keeps sending me a connect