开云体育

I agree. In the AT Calls field there should be no multi segmented HR. I'm wondering now if somehow the Times field has some unprintable character in it causing BPQ to not forward at all.? That should

Yes. Also do not use a dotted @ field for bulletins. -- Charles J. Hargrove - N2NOV NYC-ARECS/RACES Citywide Radio Officer/Skywarn Coord. NYC-ARECS/RACES Nets 441.100/136.5 PL ARnewsline Broadcast

I just noticed that I do not have 'Use 4 Char Continent Codes' enabled. Should I enable this? Personally, I prefer 4 character continent codes. 73, Chuck

Thanks Chuck. I was interpreting the line to read that the match was due to WX being in the AT field.? Maybe that is the reason I was still perplexed at why some messages forward the way that they

K5DAT-AT-USA

Thanks Chuck, that blows my theory, although it brings up a why your works at all.? WX is the TO part of the address, yet it matches on the AT part of the address.? I would be curious to see the

Since Eric and I have KA1VSC in our forwarding, here is an image of my Mail/FWD screen: KA1VSC-Mail-FWD

Hi, Mark et alia: Here is a segment from my log

This may be a hint.? Do you have USA in the AT Calls of the KA1VSC forwarding record? Not sure but my belief is that since the TO Calls and AT Calls are processed first, if any matches are found in

240926 20:43:12 |KA1VSC-4 Incoming Connect from KA1VSC 240926 20:43:12 >KA1VSC-4 [BPQ-6.0.24.42-B1FWIHJM$] 240926 20:43:12 >KA1VSC-4 240926 20:43:12 >KA1VSC-4 de WG3K> 240926 20:43:13 <KA1VSC-4

Can you provide the complete log entry?? For example... from the incoming connect all the way to the disconnect? 240926 09:34:36 |KA1VSC-4 ?Incoming Connect from KA1VSC 240926 09:34:36 >KA1VSC-4

Correct. Here is from the log: 240926 01:49:54 ?WG3K Msg 8624 Routing Trace To WX Via USA 240926 01:49:54 ?WG3K Routing Trace Type B TO WX VIA USA Route On WW NOAM USA (null) (null) 240926 01:49:54

Ok, please confirm... The 11 messages that are queued to him, none of them are addressed to @USA? Find a section of the BBS Log where you received a message addressed to @USA and show us the bps

Attached is a screenshot of my settings. 73, Eric WG3K FM18rp Packet: WG3K@WG3K.#SMD.MD.USA.NOAM E-Mail: wg3k@...

To close the loop on this issue for posterity, it turns out that the problem all along was an incorrect setting on my Signalink.? Somehow the DLY knob got turned to 50% of max.? When I adjusted it

Thanks, I'll look into it. 73, John

(N5MDT at #stx.tx.usa.noam bbs log.? Message addressed to N5MDT) 240911 17:20:59 |K7EK ? ? ?Incoming Connect from K7EK 240911 17:20:59 >K7EK ? ? ?[BPQ-6.0.24.42-B12FWIHJM$] 240911 17:20:59

Could you send me the routing trace from the bbs log file for messages that weren't routed as you expected. Thanks, John

Has any progress been made on this? Best regards, Gary, K7EK --- John, can you check the code for "Send P Msgs to more than one BBS " and be sure it works as intended.??Gary, K7EK, and I sent

Hi all. My KA3VSP Node and BBS in North Delaware is temporary down. Will resolve asap. Best, Brian, KA3VSP