开云体育

Will try this as soon as I can ..thxs for the reply

One possibility is that the link is good enough to send small connect packets but not larger data ones. The s/n if pretty low. 73, John

Another clue... after messing with it for hours I can get a stable connection at? 4FSK.200.50S.E speed if I take the sound upto the 32000 level.. its a very touchy with the adjustment... From the

HI Guy This might be related to a kernel issue that affects Kernels above 5.10 Or, it might be ARDOP_Chat is not compatible with BBS, but lets clear up the first thing first- Can you let us know what

I think the code really needs a "disconnect script".? I'll look into that. 73, John

On Fri, Apr 21, 2023 at 10:30 AM, PacketCat Red PE1RRR wrote: > > On Fri, Apr 21, 2023 at 03:53 AM, Matt Atwood, WE1H wrote: > >> HI all, >> >> While testing some connect scripts, I came across an

On Fri, Apr 21, 2023 at 03:53 AM, Matt Atwood, WE1H wrote: > > HI all, > > While testing some connect scripts, I came across an interesting thing... > > It seems that you can change UZ7HO modems via a

HI all, While testing some connect scripts, I came across an interesting thing... It seems that you can change UZ7HO modems via a connect script ATTACH 2 MODEM 0 RADIO freq mode filter c n1abc-4 I was

Thanks for the help Ken, John!? I have this working now. It's pretty slick what you can do in a connect script. One thing I found is that while you can change the UZ7HO modem used in a connect

I have been working on a getting a ardop hf port working on a pi3b and bullseye 32 bit raspberry.? Have it all up and running.. Now the issue = I can connect to the bbs with the ardop_chat program

You can't use the forwarding script to do anything after a connection - it stops being processed once a connection is completed. If you have scanning set up, the frequency will be set to the scanned

Thanks Ken!? I made a couple changes to my config.? I changed from the old define RIGCONTROL in the PORT definition method to the new RADIO PORT? definition method, and altered my times from 23:59

Hell-o Matt, My interpretation is that the 1 is RADIO 1 ties the rig control to port 1. https://www.cantab.net/users/john.wiseman/Documents/RigControl.html Yes, the rig QSY’d from the packet

Thanks Ken...? aside from the use of memories, there's not alot of differences. One that I see is that you define the start time at 00:00 versus 23:59 in your rig control statement.? What is the

Hi Matt, I just tried doing what you are attempting to do, and it worked here.? I also use UZ7HO SoundModem. I do use scanning, but currently only change between 7.104 and 14.105 once during a 24

Hi All, I am trying to figure out (with not much luck) how to return to a frequency when forwarding is complete.? Hee's the scenario using UZ7HO drivers: Radio is on 14.105 I need to forward a

Douglas, is there any way you can include BOTH config files in a side by side comparison? Mark

On the -3 Node there are no applications running. It's just a node. On the -5 Node the BBS is -1. BBS isn't the problem. The problem is when either node connects to the other node. It immediately

Hi John, I contacted Kantronics who tried to be helpful but couldn't actually do anything. The KPC-4 has been obsolete for 25 years so I didn't expect much. There are mentions of the BBS forwarding in

John, Sorry, I just found this message was being held. If you can't find any other solution, I can change the callsign used to connect to the KPC-4 to the sender of the message. 73, John