开云体育

Thanks I ran the SUDO command successfully. I also have the file unzip on the pi. I issued the "qmake" command and the following is reported... qmake: could not find a Qt installation of '' Lee Im not

If you downloaded the file below, it's the source code, so it needs to be compiled. https://www.cantab.net/users/john.wiseman/Downloads/Beta/QtSMSource56.zip Before compiling it, issue this: sudo apt

Downloaded the file(s)/ moved the dir over to the Pi. What is the execution file to start the program.? Thanks Brett

Removed the NODE from the 4th position and that "fixed" it.? Will advise KF5RLL to do the same.? The odd thing about this is that that user line has been that way since I first set up the node going

For the record, I don't really mind that it does it, just wondered if it was normal for it to happen.? Some problem with QtTerm TCP perhaps? -- Charlie (N4NVD)

The same thing happens when I choose a friend's system (KF5RLL) to connect to... -- Charlie (N4NVD)

Hmmmm... here's my user line (with password redacted) straight out of the config file. USER=n4nvd,****,N4NVD,NODE,SYSOP? ? ? ? ? ? ?; Telnet user -- Charlie (N4NVD)

Wow -- this does the trick. Thanks for the newer Version. Compiles ans starts the Soundmodem. Thanks for all! Michael

No, it isn't expected behaviour, and it doesn't happen here. The only thing I can think of is that you've accidentally added an N as the 4th parameter in your TelnetServer USER line. 73, John

Sorry, somehow a couple of lines had been deleted from Settings.cpp. Can you try this? https://www.cantab.net/users/john.wiseman/Downloads/Beta/QtSMSource56.zip Thanks, John

Thank you John, The missing link was understanding how to get WinmorControl started correctly on Windows! Everything working now, Thanks again. 73 Glenn

I use QtTerm TCP exclusively to connect to my node locally.? Since upgrading to Version 6.0.22.70, every time I connect to the node it displays the node list without being asked.? Is this normal

Thanks for the very fast reply. What an excellent and fast answer -- more than I expected. I myself thought now of changeing the make file to reduce the GCC 11 to check and compile with lower/older

This works here for my 7100. PORT ?ID=VARA 8300 ?DRIVER=VARA ?INTERLOCK=1 ?CONFIG ? ADDR 192.168.1.64? 8300 PTT CAT PATH REMOTE:C:\VARA\VARA.exe ?RIGCONTROL ?Remote 192.168.1.64:8500 ICOM

Thank you John, Is there and chance you provide a sample configuration for WinmorControl? I have loaded and open on the windows box but can't seem to get the Pi4 configured right to key the Icom 7300,

This error is caused by an incompatibility in recent versions of gcc. This should fix it. https://www.cantab.net/users/john.wiseman/Downloads/Beta/QtSMSource55.zip 73, John

Dear John, as I didnot found your email otherwise, I hopefully can get in contact this way. Thanks for that port of the UZ7HO-modem (beta) So let me assist to improve it. First I send you my compile

Yep, ?I looked into my anti-virus quarantine folder and told my software it was ok. It loaded up just fine.? ‘73 EricVE7KLZ

Thanks John!? A little more testing demonstrated that I can set Port 12 to L3ONLY=1 and Channel=B, while turing Channel B off in UZ7HO and still make connections.? That relieves me of the "dual"

Thanks John, that's excellent news!? I was testing another ham's new radio installation and this tells me his problems with out of sequence and rejected packets are now a thing of the past. Thanks!