I'm trying to set up BPQ on my Surface Go computer along with my D74 so I can play packet when portable. The D74 exposes the TNC in KISS mode. I'm receiving packets but when I use BPQTerm32 to try and connect, the radio doesn't transmit. Beacons/IDs aren't being transmitted either. I'm sure my config is wrong. I've only ever set BPQ in Linux With a D710G so it may be a bit different. Does anyone see any glaring issues?
My config follows:
=============
SIMPLE
PASSWORD=**
LOCATOR=DM79po
NODECALL=KD5LPB-9
NODEALIAS=LPB/P
IDMSG:??????????? ; UI broadcast text from NODECALL to fixed dest ID
KD5LPB/P : D74 portable node
***??????????? ; Denotes end of IDMSG text
BTEXT:??????????? ; UI broadcast text from BCALL to destination UNPROTO=
KD5LPB/P : D74 portable node located in DM79po
***??????????? ; Denotes end of BTEXT text
INFOMSG:??????? ; The INFO command text follows:
Welcome to the KD5LPB portable node, currently located in Centennial, CO DM79po
Thanks for visiting.
73 de KD5LPB
***??????????? ; Denotes end of INFOMSG text
CTEXT:??????????? ; The CTEXT text follows:
KD5LPB: Portable node located in DM79po
LPB/P:KD5LPB-9} RMS BBS CONNECT BYE INFO NODES PORTS ROUTES USERS MHEARD
***??????????? ; Denotes end of CTEXT text
FULL_CTEXT=1??????? ; 0=send CTEXT to L2 connects to NODEALIAS only
??????????? ; 1=send CTEXT to all connectees
;-----------------------------------------------? NETWORK SYSTEM PARAMETERS ----------------------------------------
NODESINTERVAL=25??? ; Nodes broadcast interval in minutes
IDINTERVAL=10??????? ; 'IDMSG' UI broadcast interval in minutes, 0=OFF
BTINTERVAL=30??????? ; The BTEXT broadcast interval in minutes, 0=OFF
MAXLINKS=63??????? ; Max level 2 links
MAXNODES=200??????? ; Max nodes in nodes table
MAXROUTES=64??????? ; Max adjacent nodes
MAXCIRCUITS=128??? ; Max L4 circuits
MINQUAL=85??????? ; Minimum quality to add to nodes table
;-----------------------------------------------------------? AX / IP/ UDP PORT ----------------------------------------------------
PORT
?PORTNUM=3
?ID=AX/IP/UDP
?DRIVER=BPQAXIP??? ; Uses BPQAXIP.DLL
?QUALITY=200??????? ; Quality factor applied to node broadcasts heard on
??????????? ; this port, unless overridden by a locked route
??????????? ; entry. Setting to 0 stops node broadcasts
?MINQUAL=0??????? ; Entries in the nodes table with qualities greater or
??????????? ; equal to MINQUAL will be sent on this port. A value
??????????? ; of 0 sends everything.
?MAXFRAME=7??????? ; Max outstanding frames (1 thru 7)
?FRACK=7000??????? ; Level 2 timout in milliseconds
?RESPTIME=1000??????? ; Level 2 delayed ack timer in milliseconds
?RETRIES=10??????? ; Level 2 maximum retry value
?UNPROTO=ID??????? ; BTEXT broadcast addrs format: DEST[,digi1[,digi2]]
?BCALL=WH6FQE-1??? ; BTEXT call. unstated defaults to APPL1CALL
CONFIG
?UDP 10093??????? ;Listens for UDP packets on this UDP port number
?UDP 10092
?MHEARD ON
; AUTOADDMAP
?BROADCAST NODES
?BROADCAST ID
ENDPORT
;--------------------------------------------------? BPQ TELNET SERVER PORT --------------------------------------------
PORT
?PORTNUM=2
?ID=Telnet
?DRIVER=Telnet
?QUALITY=0
CONFIG
?CMS=0
?CMSCALL=KD5LPB
?CMSPASS=***
?RELAYAPPL=BBS
?LOGGING=1
?DisconnectOnClose=1
?TCPPORT=8010
?FBBPORT=8011
?HTTPPORT=8012
?LOGINPROMPT=user:
?PASSWORDPROMPT=password:
?MAXSESSIONS=15
?CTEXT=Welcome to KD5LPB/P's Telnet Server\nEnter ? for list of commands\n\n
?USER=KD5LPB,***,KD5LPB,"",sysop
ENDPORT
;---------------------------------------------------------------? VHF PACKET PORT -----------------------------------------------------
PORT
?PORTNUM=1
?ID=VHF Packet Port (D74)
?TYPE=ASYNC
?PROTOCOL=KISS
?FULLDUP=0
?COMPORT=4
?SPEED=9600
?MAXFRAME=2
?FRACK=10000
?RESPTIME=3000
?RETRIES=10
?PACLEN=200
?TXDELAY=500
?SLOTTIME=100
?PERSIST=64
ENDPORT
;-------------------------------------------------------------? APPLICATIONS -------------------------------------------------------
; Applications:? APPLICATION n,CMD,New Command,Call,Alias, Quality
APPLICATION 1,BBS,,KD5LPB-1,PORTBB,255
