开云体育

I R in here now!

I acquired one of the little AA style lathes for a song in a horsetrade
and have since disassembled and rebuilt it. The original owner had given it
to his middle-aged son about 20 years ago after a lot of use. Aside from
a few of the threading gears being chewed up (need to get replacements
sometime), it's in good shape. I've coupled it with a sirplus 1/6 HP motor
too big/small? It came with only the 4 jaw chuck. Any leads on a
reasonably priced 3 jaw?

I've acquired a buncha tooling via swapmeets and now only lack the time
to play with this lathe.

Borrowed one of the Lindsey books on engine lathes and found it lots better
than any of the machine shop handbooks, etc. for a 'dummy' education. If
anyone's interested, I'd be happy to post the title/author and purchase
info once I find the book :-)

Just bought a small steam engine kit as a XMAS present for nephews
and wish I had had a chance to duplicate it on the lathe first. Anyone have
info on kits or plans for these?

That's about enough for my intro to the list. Looking forward to some
words of wisdom......

Ed T.

------------------------------------------------------------------------
eGroup home:
Free Web-based e-mail groups by eGroups.com

Ed,

I don't know which AA Lathe you have, but if it is the (nominally) 4"
lathe your spindle is threaded 1/2 x 20 and Sherline has a 3 jaw chuck
with 1/2 x 20 thread for the AA lathes. (their normal is something like
3/4 x ?) I think it was about $75.00.

BTW, I need a new spindle for my AA 109. Any ideas?

Dave Rolley


------------------------------------------------------------------------
eGroup home:
Free Web-based e-mail groups by eGroups.com

I don't know which AA Lathe you have, but if it is the (nominally) 4"
lathe your spindle is threaded 1/2 x 20 and Sherline has a 3 jaw chuck
with 1/2 x 20 thread for the AA lathes. (their normal is something like
3/4 x ?) I think it was about $75.00.

BTW, I need a new spindle for my AA 109. Any ideas?

Dave, what specifically is wrong with the spindle?

Marty

------------------------------------------------------------------------
eGroup home:
Free Web-based e-mail groups by eGroups.com

I R in here now!

I acquired one of the little AA style lathes for a song in a horsetrade
and have since disassembled and rebuilt it. The original owner had given
it to his middle-aged son about 20 years ago after a lot of use. Aside
from a few of the threading gears being chewed up (need to get
replacements sometime), it's in good shape. I've coupled it with a sirplus
1/6 HP motor too big/small?

If it doesn't bog down with the work you do, 1/6 is fine. I believe I
remember seen an old Sears Craftsman Ad that said the motor for
these little machines was 1/4hp.

I've acquired a buncha tooling via swapmeets and now only lack the time to
play with this lathe.

Just bought a small steam engine kit as a XMAS present for nephews
and wish I had had a chance to duplicate it on the lathe first. Anyone
Anyone have info on kits or plans for these?

Try this page:

Also if you haven't picked up a copy yet, get Home Shop Machinist


Here is another URL for info on Steam Engines:


That should keep you busy for a bit! ;-)
Marty

------------------------------------------------------------------------
eGroup home:
Free Web-based e-mail groups by eGroups.com