开云体育

ctrl + shift + ? for shortcuts
© 2025 开云体育

atlas 10" headstock reassembly


 

hi all, I am at the stage where i think i can put the headstock back together.? As allways with these things i have done some research into what grease to use for the timkin bearings and ending up learning far too much and still none the wiser.
?
what grease should i use please?
many thanks


 

Mine wants spindle oil, not grease. Only place that uses grease is the shaft bearings for the countershaft.? SAE10 non-detergent oil is specified in the older manuals & lube charts. SAE20 for later references.?

Look in files for the lube chart.

Bill in OKC?

William R. Meyers, MSgt, USAF(Ret.)

Aphorisms to live by:
Good judgement comes from experience. Experience comes from bad judgement.?
SEMPER GUMBY!
Improvise, Adapt, and Overcome.
Physics doesn't care about your schedule.
The only reason I know anything is because I've done it wrong enough times to START to know better.
Expect in one hand, expectorate in the other. See which one gets full first.



On Saturday, October 26, 2024 at 01:04:08 AM CDT, hedgesben@... <hedgesben@...> wrote:


hi all, I am at the stage where i think i can put the headstock back together.? As allways with these things i have done some research into what grease to use for the timkin bearings and ending up learning far too much and still none the wiser.
?
what grease should i use please?
many thanks


 

No grease on spindle bearings!?
Use spindle oil. I use Zoom Spout oil.

On Sat, Oct 26, 2024, 1:04 AM hedgesben via <hedgesben=[email protected]> wrote:
hi all, I am at the stage where i think i can put the headstock back together.? As allways with these things i have done some research into what grease to use for the timkin bearings and ending up learning far too much and still none the wiser.
?
what grease should i use please?
many thanks


 

/g/atlas-craftsman/files/23%20Maintenance,%20Repairs%20and%20%20Tech%20Bulletins/Atlas%20Lathe%2010F%20Lubrication%20Rev%201.pdf