Re: Atlas Lathe FS Reno Nv CL
|
Where did you find a new replacement 4-jaw chuck for $60? Besides that, making your own would certainly be good practice. :) Bill in OKC William R. Meyers, MSgt, USAF(Ret.) Aphorisms to live by: Good judgement comes from experience. Experience comes from bad judgement.? SEMPER GUMBY! Physics doesn't care about your schedule. The only reason I know anything is because I've done it wrong enough times to START to know better. Expect in one hand, expectorate in the other. See which one gets full first.
On Monday, March 31, 2025 at 09:18:24 AM CDT, Andrei via groups.io <calciu1@...> wrote:
The value of one's time is greater than the 60 bucks or so you have to spend on a replacement chuck.?
From: [email protected] <[email protected]> on behalf of Bill in OKC too via groups.io <wmrmeyers@...>
Sent: Monday, March 31, 2025 9:58 AM To: [email protected] <[email protected]> Subject: Re: [atlas-craftsman IO] Atlas Lathe FS Reno Nv CL ?
The current Machinist's Workshop has a DIY 4-jaw chuck. Might be an option for cheap bastriches like me. :)?
Bill in OKC
William R. Meyers, MSgt, USAF(Ret.)
Aphorisms to live by:
Good judgement comes from experience. Experience comes from bad judgement.?
SEMPER GUMBY!
Physics doesn't care about your schedule. The only reason I know anything is because I've done it wrong enough times to START to know better. Expect in one hand, expectorate in the other. See which one gets full first.
On Sunday, March 30, 2025 at 06:42:16 AM CDT, James Younce via groups.io <catpop10@...> wrote:
Looks like mine and also without 4 jaw chuck, but it does have steady rest.. So a little more investment is required on top of $500.
|
Bill in OKC too