开云体育

ctrl + shift + ? for shortcuts
© 2025 开云体育
  1. Atlas-Craftsman
  2. Messages
Single Messages Topics Expanded Polls

Re: trying to attach the motor to my 10f

 

Do you have the horizontal or vertical countershaft?? On my 10F I have a horizontal countershaft and I do not have that plate.? To me that looks like an adapter that somebody made because their motor didn't fit the stock bracket.? My motor also doesn't fit the stock motor bracket properly either, but some previous?owner of my lathe drilled/enlarged a couple of holes to make it work and this setup has been working for me without any issues.? It shouldn't?matter too much how you mount it as long as your motor pulley is more or less inline?with the countershaft pulley and you can get?the belt properly tensioned.

I made ?about cleaning up my countershaft/motor assembly.? There are several photos there showing how my motor mounted to the bracket (you'll have to expand the spoiler sections to see the?images).

On Sat, Dec 28, 2024 at 9:44?AM hedgesben via <hedgesben=[email protected]> wrote:
Hi all i have finally got to the point where i can see light at the end of the tunnel and its not the oncoming express train to Sheffield!!
?
Todays task was to measure up for the bolts to mount the motor to the lathe but? there is this plate bolted to the bottom of the motor and its unclear if its supposed to be there.? Either way the bolts dont seem to line up with the bracket on the lathe.? Is this second plate supposed to be there
?
Pics for clarification
Join [email protected] to automatically receive all group messages.