Re: Cross feed lever modification
|
BTW, based upon an Atlas price list dated 01 Feb 1966 that I just acquired, we need to back up the introduction date of the 3985, 3986, 3995 and 3996 to at least Jan, 1966. ? Also, if you study the illustrated parts lists for the 3991 and the 3996, you will see that the apron itself is a different part number.? The shaft that fits into the gear that drives the gear on the cross feed screw is different, and has a bushing that looks like it was installed on the shaft before the shaft was peened into the gear.? This bushing is not shown on the 3991 list.? I don¡¯t know whether it wasn¡¯t there or was omitted from the list. ?
toggle quoted message
Show quoted text
From: [email protected] [mailto:[email protected]] On Behalf Of Bill Williams
Sent: Sunday, February 24, 2019 09:38
To: [email protected]
Subject: Re: [atlas-craftsman IO] Cross feed lever modification? Dave, while it is just the standard 1968 OEM bracket, easily
adapted to earlier models I will be glad to take some pictures and send
them along. Shop is warming up so it should be soon!? Bill in (Frigid) CO
On 2/24/19 5:36 AM, Dave Matticks wrote:
Hi Bill,
Got a picture of it on your lathe?
I don't want a science project but a step up from bent sheet metal
should be pretty easy!
Dave
|
