开云体育

Alamo, I copied and pasted your question (from "I really need some help,... through ....problem starts happening again") into https://x.ai/grok (X's AI site) and received a very detailed answer to

Thanks for clarifying that. It is very odd indeed that it stops working after changing the IP address. Initially I suspected port forwarding issues but with it not working locally, that has been ruled

No... the third raspberry (the one I'm struggling to get working) doesn't work at all... both local and external, it doesn't work... it always presents the problem of "Invalid URI: empty URI", and

If I’m understanding correctly, the third (newest) Spyserver works fine if you access it by its local IP address but not from the external DDNS address? If so, did you add a rule for port 48 (the

Hi Graeme Yes, I have the rules already set up on my router... I use DDNS.NET for this... I route the aforementioned ports (44 and 46) on both routers that I have, and I've been using them for a

Do you have port forwarding rules set up on your router that you need to extend/modify for your new port/local Spyserver device? I was curious to see the Spyserver was set up to listen directly to

Hi!!!... Thanks for your reply... but I'll try to answer you as completely as possible. I have a Raspberry Pi 3 B+, and I'm thinking about setting up a Spyserver server to listen to aviation. I'm

Hello Tim (and others), Today I had an idea en went to a big secondhand shop. They hade a box with dozens of 5v usb adapters. I made a deal and took 15 different units home, all at least 2 amps, an

Hello all, My antenna is a YouLoop. And no, the antenna is not the problem. I tryed a backup accu to charche a phone. Now everything is fine, no interference at all. The power cable has ferrite RFI

What prog is saying here is install the latest os for the Raspberry Pi 3 The Raspberry Pi 3 is a 32 bit ARM processor so you need the version of Spyserver compiled for ARMHF (that is the 32 bit

Upgrade your OS.

But is exactly my problem, I can't download these libraries... where on earth can I download this? I've already wasted almost a week trying to solve it and I haven't been able to!!!

Thank you all very much!

Take a look at Dragon OS, that might be what you're looking for, there's two versions, there is one for the PC and there is one for Pi. I have been running it successfully for two years on my Pi

You can't have both. It's one or the other. Fix this first.

Hello everyone... I really need some help, because I've been trying to set up a Spyserver on my Raspberry Pi 3b+ for a long time. Let's look at the following situations: I have two Raspberry Pis,

Forget that HAM culture. A better strategy is to make a good magnetic loop that has almost no response to the electric field, then keep it away from the *magnetic noise* - which is easier to achieve,

Many of the small AC adapters are cheap switching type supplies. Get a linear supply with a transformer...a little bulkier but no more switching hash to pick up in a receiver. wrote:

I am hosting a SpyServer on a RPi 5 with a Discovery and a hand made "YouTwin" passive loop. Everything is in the attic and the antenna is 2 meters away from the RPi. Most of the noise comes from the

I had the same issue. My problem was infact the Ac adapter. Even though it was an "official" one, it was garbage. It was a big source of noise on my Icom R-75. I ended up using a spare samsung cell