I know this?is late notice, but I just decided to do this.? ?
I am going over to Robertsville State Park around 1:30 and set up for? POTA activation.? If one of the pavilions is open, that is where I will be. If not, I will find an open picnic table and be there.??
Thanks Curt - KF0CQN
|
Re: tape measure Yagi antenna build project
February 19 at 1:00pm
toggle quoted message
Show quoted text
-----Original Message----- From: "martin koirtyohann" <ka0mek@...> Sent: Saturday, February 4, 2023 12:06pm To: [email protected]Subject: Re: [ZBARC] tape measure Yagi antenna build project --------------------------- WHAT IS THE DATE FOR THIS ? ---------------------------
|
Re: tape measure Yagi antenna build project
Hello Martin, KA0MEK The antenna build will begin on Sunday, February 19 at 1pm at the club house. 73! Al, KA0VIA
toggle quoted message
Show quoted text
On Sat, Feb 4, 2023, 12:06 PM martin koirtyohann < ka0mek@...> wrote: WHAT IS THE DATE FOR THIS ?
|
Re: tape measure Yagi antenna build project
WHAT IS THE DATE FOR THIS ?
|
i may be forced to get a new email address? as AT&T IS CLOSING MY SBCGLOBSAL.NET ADDRESS AT&T WAS SOLD TO another? COMPANY?
|
Re: tape measure Yagi antenna build project
Hello Curt, KF0CQN,
A-ok Curt, no antenna build for you but you will attend and bring your Nano VNA. That will be helpful!
Thanks and 73! Al J, KA0VIA
toggle quoted message
Show quoted text
Al,
I will not be building an antenna, but will plan on being there.? I have a Nano VNA I can bring that can be used as an antenna analyzer.
Thanks Curt - KF0CQN
On Fri, Feb 3, 2023 at 6:16 AM george eckhoff < gunbarber@...> wrote:
This George eckhoff kdopeu I won't be able to attend Feb 19th if you would take my name off the list.
Powered by Cricket Wireless
Get
Al,
?I don’t want to build an antenna but I will plan on being there. I’ll try to bring some tools in case we are short on them.
73,
Bruce N0XNH
?Hello ZBARC members,
During the February 1 meeting six members signed-up for the antenna build project. The antenna to be built will be a yagi that can be used for fox hunting and other amateur uses.
If you did not sign up at the meeting on February 1 then please respond to this email and let me know if you want to build an antenna with the group.
I will wait a few days for additional sign-ups then I will move forward with purchasing the material. See the attachment for a drawing of the antenna.
The antenna build will take place on Sunday afternoon Feb 19 at the club house.
Thanks and 73!, Al J, KA0VIA
|
Re: tape measure Yagi antenna build project
Hello George, KD0PEU, I will take your name off the list. Thank you for contacting me. Al J, KA0VIA
toggle quoted message
Show quoted text
On Fri, Feb 3, 2023 at 6:16 AM george eckhoff < gunbarber@...> wrote:
This George eckhoff kdopeu I won't be able to attend Feb 19th if you would take my name off the list.
Powered by Cricket Wireless
Get
Al,
?I don’t want to build an antenna but I will plan on being there. I’ll try to bring some tools in case we are short on them.
73,
Bruce N0XNH
?Hello ZBARC members,
During the February 1 meeting six members signed-up for the antenna build project. The antenna to be built will be a yagi that can be used for fox hunting and other amateur uses.
If you did not sign up at the meeting on February 1 then please respond to this email and let me know if you want to build an antenna with the group.
I will wait a few days for additional sign-ups then I will move forward with purchasing the material. See the attachment for a drawing of the antenna.
The antenna build will take place on Sunday afternoon Feb 19 at the club house.
Thanks and 73!, Al J, KA0VIA
|
Re: tape measure Yagi antenna build project
Al,
I will not be building an antenna, but will plan on being there.? I have a Nano VNA I can bring that can be used as an antenna analyzer.
Thanks Curt - KF0CQN
toggle quoted message
Show quoted text
On Fri, Feb 3, 2023 at 6:16 AM george eckhoff < gunbarber@...> wrote:
This George eckhoff kdopeu I won't be able to attend Feb 19th if you would take my name off the list.
Powered by Cricket Wireless
Get
Al,
?I don’t want to build an antenna but I will plan on being there. I’ll try to bring some tools in case we are short on them.
73,
Bruce N0XNH
?Hello ZBARC members,
During the February 1 meeting six members signed-up for the antenna build project. The antenna to be built will be a yagi that can be used for fox hunting and other amateur uses.
If you did not sign up at the meeting on February 1 then please respond to this email and let me know if you want to build an antenna with the group.
I will wait a few days for additional sign-ups then I will move forward with purchasing the material. See the attachment for a drawing of the antenna.
The antenna build will take place on Sunday afternoon Feb 19 at the club house.
Thanks and 73!, Al J, KA0VIA
|
Re: tape measure Yagi antenna build project
This George eckhoff kdopeu I won't be able to attend Feb 19th if you would take my name off the list.
Powered by Cricket Wireless
Get
toggle quoted message
Show quoted text
Al,
?I don’t want to build an antenna but I will plan on being there. I’ll try to bring some tools in case we are short on them.
73,
Bruce N0XNH
On Feb 1, 2023, at 10:28 PM, Allan Johnston <adhjohnston@...> wrote:
?Hello ZBARC members,
During the February 1 meeting six members signed-up for the antenna build project. The antenna to be built will be a yagi that can be used for fox hunting and other amateur uses.
If you did not sign up at the meeting on February 1 then please respond to this email and let me know if you want to build an antenna with the group.
I will wait a few days for additional sign-ups then I will move forward with purchasing the material. See the attachment for a drawing of the antenna.
The antenna build will take place on Sunday afternoon Feb 19 at the club house.
Thanks and 73!, Al J, KA0VIA
|
Re: 2023 Christmas dinner survey
Either one is fine with us, thanks for planning ahead!
toggle quoted message
Show quoted text
-------- Original message -------- From: Allan Johnston <adhjohnston@...> Date: 2/2/23 12:29 PM (GMT-06:00) Subject: Re: [ZBARC] 2023 Christmas dinner survey
Hello Bruce, N0XNH
I vote for Coltons. Thanks, Al J, KA0VIA
On Thu, Feb 2, 2023 at 11:12 AM Bruce Hanratty N0XNH < n0xnh@...> wrote: Everyone,
?After last nights February meeting, several of us were talking about the Christmas dinner for 2023 and decided instead of waiting until the March meeting to discuss it I would send out a survey for the 2023 Christmas dinner location so maybe we can schedule it for the first Sunday in December as has been done in the past.
?We have come up with two choices; the first is The Creek, where we had it this past January, the second is Colton's Steak House in Washington.
?The Creek does not charge for the room and we would have to order from the catering menu like we did last time. That is we have a few choices for each of these items, salad, meat/fish and vegetable. You get to pick one salad and two each from the meat/fish and vegetable items.
?Colton's does not charge for the room and we would be able to order off the regular menu. If you've been to Colton's, they would seat us in the area to the left (east side) of the building.
?Let me know what you think and I will contact whoever we pick and see if that would be available. The sooner we contact them, the better chance we have of getting it the first Sunday in December.
73, Bruce N0XNH
|
Re: 2023 Christmas dinner survey
Hello Bruce, N0XNH
I vote for Coltons. Thanks, Al J, KA0VIA
toggle quoted message
Show quoted text
On Thu, Feb 2, 2023 at 11:12 AM Bruce Hanratty N0XNH < n0xnh@...> wrote: Everyone,
?After last nights February meeting, several of us were talking about the Christmas dinner for 2023 and decided instead of waiting until the March meeting to discuss it I would send out a survey for the 2023 Christmas dinner location so maybe we can schedule it for the first Sunday in December as has been done in the past.
?We have come up with two choices; the first is The Creek, where we had it this past January, the second is Colton's Steak House in Washington.
?The Creek does not charge for the room and we would have to order from the catering menu like we did last time. That is we have a few choices for each of these items, salad, meat/fish and vegetable. You get to pick one salad and two each from the meat/fish and vegetable items.
?Colton's does not charge for the room and we would be able to order off the regular menu. If you've been to Colton's, they would seat us in the area to the left (east side) of the building.
?Let me know what you think and I will contact whoever we pick and see if that would be available. The sooner we contact them, the better chance we have of getting it the first Sunday in December.
73, Bruce N0XNH
|
Re: tape measure Yagi antenna build project
Hello Martin, KA0MEK
Please bring any tools that you might have for the antenna build. Thanks in advance! Al J, KA0VIA
toggle quoted message
Show quoted text
On Thu, Feb 2, 2023 at 11:37 AM martin koirtyohann < ka0mek@...> wrote:
I CAN BRING? A PVC TUBING CUTTER & A TAPE FOR MESURERING TH PIPE WITH& IF MICK BRINGDS MY DTILL BI BACK I CAN BRING IT TOO+ SOME NUT DTIVERS?
On Thursday, February 2, 2023 at 11:30:02 AM CST, Bruce J Bartram < bartrambrucej@...> wrote:
The Creek was ok. I never been to Colton’s so I cannot make a good choice. Either one is ok with me I don't know what happened.? I think I answered but then I got an empty draft on my screen.?
My vote is to return to The Creek with the same menu or possibly turkey instead of chicken. I'm not a big fan of Colton's,? but I would go if everyone else chooses that.?
Thank you for getting on this early so we can get reservations in December.??
|
Re: 2023 Christmas dinner survey
With some dietary concerns, I would?prefer Colton's, but the Creek was very good.
toggle quoted message
Show quoted text
On Thu, Feb 2, 2023 at 11:12 AM Bruce Hanratty N0XNH < n0xnh@...> wrote: Everyone,
?After last nights February meeting, several of us were talking about the Christmas dinner for 2023 and decided instead of waiting until the March meeting to discuss it I would send out a survey for the 2023 Christmas dinner location so maybe we can schedule it for the first Sunday in December as has been done in the past.
?We have come up with two choices; the first is The Creek, where we had it this past January, the second is Colton's Steak House in Washington.
?The Creek does not charge for the room and we would have to order from the catering menu like we did last time. That is we have a few choices for each of these items, salad, meat/fish and vegetable. You get to pick one salad and two each from the meat/fish and vegetable items.
?Colton's does not charge for the room and we would be able to order off the regular menu. If you've been to Colton's, they would seat us in the area to the left (east side) of the building.
?Let me know what you think and I will contact whoever we pick and see if that would be available. The sooner we contact them, the better chance we have of getting it the first Sunday in December.
73, Bruce N0XNH
|
Re: Fw: Update on AmazonSmile
toggle quoted message
Show quoted text
On 1/25/23 11:18, Bruce Hanratty N0XNH wrote:
Everyone,
?Amazon is shutting down their Smiles program and the Zerobeaters are a beneficiary of that program. I just thought I would send out the email that I got from Amazon about the Smiles program shutdown for everyone to read.
73,
Bruce N0XNH
I went ahead and removed the Amazon Smiles link from ZBARC's website footer.? If the site needs any other updates, please let me know.
Thanks,
John - KF?IFU
|
Re: Fw: Update on AmazonSmile
On 1/25/23 11:18, Bruce Hanratty N0XNH
wrote:
Everyone,
?Amazon is shutting down their Smiles program and the
Zerobeaters are a beneficiary of that program. I just thought I
would send out the email that I got from Amazon about the Smiles
program shutdown for everyone to read.
73,
Bruce N0XNH
I went ahead and removed the Amazon Smiles link from ZBARC's
website footer.? If the site needs any other updates, please let
me know.
Thanks,
John - KF?IFU
|
Re: tape measure Yagi antenna build project
I CAN BRING? A PVC TUBING CUTTER & A TAPE FOR MESURERING TH PIPE WITH& IF MICK BRINGDS MY DTILL BI BACK I CAN BRING IT TOO+ SOME NUT DTIVERS?
On Thursday, February 2, 2023 at 11:30:02 AM CST, Bruce J Bartram <bartrambrucej@...> wrote:
The Creek was ok. I never been to Colton’s so I cannot make a good choice. Either one is ok with me
toggle quoted message
Show quoted text
I don't know what happened.? I think I answered but then I got an empty draft on my screen.?
My vote is to return to The Creek with the same menu or possibly turkey instead of chicken. I'm not a big fan of Colton's,? but I would go if everyone else chooses that.?
Thank you for getting on this early so we can get reservations in December.??
|
Re: tape measure Yagi antenna build project
The Creek was ok. I never been to Colton’s so I cannot make a good choice. Either one is ok with me
toggle quoted message
Show quoted text
I don't know what happened.? I think I answered but then I got an empty draft on my screen.?
My vote is to return to The Creek with the same menu or possibly turkey instead of chicken. I'm not a big fan of Colton's,? but I would go if everyone else chooses that.?
Thank you for getting on this early so we can get reservations in December.??
|
Re: tape measure Yagi antenna build project
I don't know what happened.? I think I answered but then I got an empty draft on my screen.?
My vote is to return to The Creek with the same menu or possibly turkey instead of chicken. I'm not a big fan of Colton's,? but I would go if everyone else chooses that.?
Thank you for getting on this early so we can get reservations in December.??
|
Re: 2023 Christmas dinner survey
I was very happy with the food, price, and atmosphere at the Creek. I'm also not a big fan of Colton's, but I would go if everyone else goes. My vote is The Creek. Thank you for getting on top of this early for reservations in December.? I would be happy with the same menu, or substitute turkey for the chicken we had last time. It was all good.?
toggle quoted message
Show quoted text
On Thu, Feb 2, 2023 at 11:12, Bruce Hanratty N0XNH <n0xnh@...> wrote: Everyone,
?After last nights February meeting, several of us were talking about the Christmas dinner for 2023 and decided instead of waiting until the March meeting to discuss it I would send out a survey for the 2023 Christmas dinner location so maybe we can schedule it for the first Sunday in December as has been done in the past.
?We have come up with two choices; the first is The Creek, where we had it this past January, the second is Colton's Steak House in Washington.
?The Creek does not charge for the room and we would have to order from the catering menu like we did last time. That is we have a few choices for each of these items, salad, meat/fish and vegetable. You get to pick one salad and two each from the meat/fish and vegetable items.
?Colton's does not charge for the room and we would be able to order off the regular menu. If you've been to Colton's, they would seat us in the area to the left (east side) of the building.
?Let me know what you think and I will contact whoever we pick and see if that would be available. The sooner we contact them, the better chance we have of getting it the first Sunday in December.
73, Bruce N0XNH
|
Re: tape measure Yagi antenna build project
Al,
?I don’t want to build an antenna but I will plan on being there. I’ll try to bring some tools in case we are short on them.
73,
toggle quoted message
Show quoted text
On Feb 1, 2023, at 10:28 PM, Allan Johnston <adhjohnston@...> wrote:
?Hello ZBARC members,
During the February 1 meeting six members signed-up for the antenna build project. The antenna to be built will be a yagi that can be used for fox hunting and other amateur uses.
If you did not sign up at the meeting on February 1 then please respond to this email and let me know if you want to build an antenna with the group.
I will wait a few days for additional sign-ups then I will move forward with purchasing the material. See the attachment for a drawing of the antenna.
The antenna build will take place on Sunday afternoon Feb 19 at the club house.
Thanks and 73!, Al J, KA0VIA
|