开云体育

SysEx Controllers


 

开云体育

Hi all,

?

Related to the recent discussion, but not specific to the QYs, can anyone recommend a MIDI controller that can send SysEx?

?

Regards

Andy

?

From: [email protected] <[email protected]> On Behalf Of write_jay via groups.io
Sent: Monday, January 13, 2025 2:32 PM
To: [email protected]
Subject: [YamahaQY70AndQY100] DIY Re: New post same problems :(

?

Hi I have a Novation Zero SL MKii controller mapping that I downloaded for the QY100 that does all this. ?Can’t find the link at the moment so you’ll have to find it yourself. ?But you could use that as a resource to copy the parameters you want. ?

?

Parameter control is achieved using MIDI SYSEX commands. ? These are special messages that carry generic data. ?The format and command list is in the link below, found in the files section of this forum. ?You’ll have to learn a bit about sysex and your controllers capabilities. ?Have fun!

?

it seems you have some basic questions about midi routing and so on. ?This is all well described on YouTube videos and other posts about midi and and a search engine will serve you better than forum posts on an obscure but awesome ?piece of hardware.

?

good luck.

?


 

开云体育

I recommend a Novation Remote SL MKII (comes in 24, 36, 48, and 60 key versions I believe). Not the best windiws editor, but handles mist sysex like a champ. ?Bank/patch are the only thing that us difficult as that is truly a 2 part sysex message and the program concontrol change sends ob one ( as memory serves).

On Jan 13, 2025, at 12:23?PM, AndyG_UK via groups.io <andrew.gotteri@...> wrote:

?

Hi all,

?

Related to the recent discussion, but not specific to the QYs, can anyone recommend a MIDI controller that can send SysEx?

?

Regards

Andy

?

From: [email protected] <[email protected]> On Behalf Of write_jay via groups.io
Sent: Monday, January 13, 2025 2:32 PM
To: [email protected]
Subject: [YamahaQY70AndQY100] DIY Re: New post same problems :(

?

Hi I have a Novation Zero SL MKii controller mapping that I downloaded for the QY100 that does all this. ?Can’t find the link at the moment so you’ll have to find it yourself. ?But you could use that as a resource to copy the parameters you want. ?

?

Parameter control is achieved using MIDI SYSEX commands. ? These are special messages that carry generic data. ?The format and command list is in the link below, found in the files section of this forum. ?You’ll have to learn a bit about sysex and your controllers capabilities. ?Have fun!

?

it seems you have some basic questions about midi routing and so on. ?This is all well described on YouTube videos and other posts about midi and and a search engine will serve you better than forum posts on an obscure but awesome ?piece of hardware.

?

good luck.

?


--
“The longest journey starts with the first step." ?- Lao Tzu